When making hot drinks coasters always ensure your brand of resin is temperature resistant to 100°C (212°F) when cured
The mould I'm using requires 225g resin in total, so I measured 105g for the first pour and 120g for the second
The first pour has very fine glitter added
Divide the resin between the four sections of the mould
What do you call a rose that hasn't blossomed yet?
Bud XD
Get ready!
Kill the bubbles!
This design was ̶r̶i̶p̶p̶e̶d̶ ̶o̶f̶f̶ ̶f̶r̶o̶m̶ inspired by Charles Rennie Mackintosh
This is Pebeo Cerne Relief SIlver Outliner (link in description) but other brands are available
If ever your partner asks them to name their favourite flower...
Apparently 'self-raising' is not the correct answer :/
The best type of flowers to give your wife...
really depends on what you've done wrong XD
Did you hear about the pink flower that came back from the dead...
It was a rein-carnation XD
Leave the outliner to dry overnight. It will actually shrink a tiny bit when it does.
The Pebeo Vitrail Discovery set is the best way to buy a range of different colours in small pots
The paint can be added one drop at a time with a toothpick
Only a thin layer is needed
Allow the paint to dry overnight (a minimum of 8 hours)
The second pour of resin should fill the mould to the top
The white paint turned beige in the resin, and the violet went dark...
I tested the other colours and they all worked fine. I'll put more experiments on my Instagram @resinaceous
Thanks for watching!
[Alexa] Roses are red, violets are blue...
[Alexa] If you were a flower, I wouldn't pick you