well welcome back to Steve Robb reviews these guys remember this well I got a different one
quite similar this one guys I'm gonna open this for you I'm gonna demonstrate it for you this is
for rivets this one here is for nut certs guys I love this thing it's just terrific and let's get
to it right now and I'm gonna show you exactly why you don't need any of these things but they
sure come in handy well let's get started right away here it is right here and that's new that
I got now they do have one that's below this one where you don't get as many fittings and I just
opened it up here and here it is right here and you get all the different attachments and guys
this pretty much covers everything you're ever going to ever need and I got the Imperial one
so it goes from small small small all the way up to 3/8 and I'm going to show you it in action but
first I just want to show you the only ones I ever use here is a 3/8 one and here is a quarter-inch
and of course they come in steel and they come an aluminum and whatever you like either one
whatever you carry doesn't matter and you have to match it up for the drill size for the small ones
here which is the quarter inch yeah I believe it's a 3/8 and these ones are 1/2 inch outside
damn inner hole you have to drill so I'm going to demonstrate both of them to you but you know
what you don't need this tool at all here's one of them nutsert sir and guys you can get like a
hundred of these for like six bucks seven bucks depending on where you are in the world but this
is all you really need you know you put a wrench on here you put a wrench on here and the more you
tighten it down the more it's gonna pull it in this way and I'll show you a couple other tools
that I have as well and they're different at the end here but I'm gonna demonstrate this one here
for you and just show you how good this I haven't even tried this yet but I have the other set and
the other set is this one here for doing rivets I've been using it extensively and this thing
is just terrific so I decided to buy the one for the nutsert here so let's get to it right now well
guys this is one of the few times I had to break out the instructions and I just thought I'd show
you here if you guys can just saw it onto that there that's all the different sizes here that
you have in this kit and this is the grip range and guys this will cover pretty well everything
you can ever think of and if you notice down here yeah there are some metric now I can't see
me using them but you never can tell and tell you the truth you have to really search hard to find
some of these in metric depending on what country you're from but you know what this does cover the
metric as well so I just want to show you this unit I did put this mandrel in and I just want
to show you if I go clockwise it's going in right I go counterclockwise that's when you set it and
this is adjustable this mandrel part here so if I put one on the end here and you can see that
there's a lot of space there now they're saying in the instructions of course you wouldn't want to
have it like this because by the pot time you pull it all the way down depending on the thickness of
the grip range that you're attaching to something it may not collapse it completely but it does say
to leave a little bit of head space so I figure I'm just going to leave a little bit which is like
say there and then you can tighten up your collar and that's pretty well it and here is the end that
you put into your drill so let's try some right now well there we go right there and I've got two
that I'm gonna do and I'm gonna pick the aluminum ones and I want to show you something here is
depending on the style that you get you see this one here has like a yeah a knurled surface around
the base there this one in the aluminum does not well this one will not fit in there so yes says
you've got to drill a little bit bigger as this one here does so you got to really check these
things I guess but here we go right here I've got it on the end and I've got it on forward and just
put it in here hold on let's go guys that's it right there now how do you reverse okay all the
way seems like she's slipping here somehow okay now how do you get the thing out I mean I can
manually take it out here but maybe I had it in there too tight guys maybe I did have it too tight
I'm not too sure but uh I'm gonna have to take that out and figure out what's going on okay guys
that was my mistake my fault I want to show you this so far that comes out I'll put it in reverse
yeah it's plenty so when I finally got it adjusted right it came out
so let's try the second one here okay ready let's see if I can get
this one done right now okay I put it in there it's on forward let's go
now look at that again it's that is not collapse too much and that is not coming out and I don't
know why let me just take a look and see what's going on here because I don't like this a bit
let's just take this baby right apart and see what's going on no there it is it's all apart I
got this all out nothing came apart I don't know why it's not unscrewing that's gonna we're gonna
have to investigate this a little bit better just so far I'm not liking this too much sure it goes
in there fine but it doesn't want to pull all the way out let me take a look a little bit more here
well let's just take a look at this again this does not
rotate so let's take a look at the instructions
if we take a look at the instructions they're just above the black line I got their thread
out of the rib nut with your off hand guys this is not going to remove it so easily yeah you got
to have to manually take this yeah you got to take this and undo it like that because you know what
that's just pulling in and out there's no rotation I can't see it so far it depends
on the threads they said and the the grip range that you're using it may be different but as far
as I'm concerned I don't see this here rotating to go in and out slowly back and forth there's
no rotation well what do you guys think you know what this is one purpose of it here and this is
another purpose here now you could see where it would come in handy using these nuts if it
was in the middle of a pipe or somewhere where you can't put a nut on to the backside but you
know what what have I been using for years this is the exact same thing with your hand the only
problem is it is so hard to collapse when you use a steel or if you use a larger size I've
never seen one of these that you could actually compress a 3/8 quarter-inch yeah 3/8 no no I
haven't seen it yeah they do make some like this now this is for rivets but they do have some that
has a stem that comes out and yeah you can use one of these to tell you the truth this unit
here I was under the understanding that maybe you could once you applied it and it gripped in
that you could reverse it and take it out but no this only applies in and out and yeah it's not a
deal-breaker for me the whole idea behind us is the portability and getting in a spot I like it
but you don't want to tell you the truth like I showed you you can just use a nut you could
use you know in a washer you can use the other two pieces of equipment I got here do you need
one of these I would say absolutely not is it gonna come in handy for me well I'll tell you
something I've got some projects lined up where I'm going to be using a lot of rivets and a lot
of these and tell you the truth I don't want to be you know getting a new pair of of these because be
these a couple hundred bucks if you use you get a good one and one of these are great I have one
but it's only good for quarter-inch and I'll tell you what half the time you're playing around and
goofing around with this thing too and you have to manually you got to manually take the the
threads out of the nutsert in the first place so I don't know you guys let me know what you think
I think it's a good tool it was just my first experience with it if anything changes where I
can figure out how that will electrically back out of there well that would be great and it'll
be an update to this but for now I think it's I'm gonna give it a seven out of ten you have
to read the instructions you have to figure out how to put them different nose cones in there
you have to be able to adjust it properly maybe some of that is my fault with this like I said
before I'm not a professional tool to ruler I'm just somebody that buys the tools you know uses
it themselves and this is the exact same thing you're going to get if you were to buy one of
these tools you have to figure it out for yourself as well right thanks for joining me here today if
you haven't seen this channel before all you're welcome to subscribe and we're going to experiment
with more tools in the future and I'll do my best that's showing how I work with them Cheers
you