DJI Mavic 3 Pro/Pro Cine - Unboxing
In this video
we will show you how to set up DJI Mavic 3 Pro and Mavic 3 Pro Cine for the first time
You may purchase the following combo based on your actual needs
including
DJI Mavic 3 Pro (DJI RC)
DJI Mavic 3 Pro Fly More Combo (DJI RC)
DJI Mavic 3 Pro Fly More Combo (DJI RC Pro)
and DJI Mavic 3 Pro Cine Premium Combo
Open the box and remove DJI Mavic 3 Pro and its accessories
The built-in battery of the remote controller is set to sleep mode by default
Before using
connect the remote controller and charger via USB-C cable for approximately one minute to activate the battery
Press the remote controller power button once
and then again and hold for about two seconds to power on or off the remote controller
Select a language after powering on the remote controller
Connect the remote controller to the internet via Wi-Fi
After connecting
tap Next to continue and select the time zone, date, and time
Log in with your DJI account if you already have one
For new users
please register before logging in
After successfully logging in
an activation prompt will appear on the screen
Tap to activate
Successful activation will result in a notice on the screen
Remove the storage cover
and unfold the drone’s arms
When using the battery for the first time
make sure that the battery is mounted securely
Connect the USB-C port at the rear of the aircraft directly to the battery charger
until the battery indicators are on
indicating the battery is successfully activated
If you are activating three new batteries simultaneously with the battery charging hub
please note that activation and charging of the second battery will not begin
until the first battery is activated and fully charged
Press the aircraft power button once
and then again and hold for about two seconds to power on or off the aircraft
Run the DJI Fly app
and log in with your DJI account and password
Follow the app’s instructions to finish the activation process
If you have purchased or intend to purchase DJI Care Refresh
please finish the purchase and binding within 48 hours of activating the aircraft
A prompt will appear on the top left of the screen
if a firmware update is available
Tap the prompt to enter the update screen
and tap “Start Update” to update the aircraft
and remote controller to the latest firmware version at the same time
During the update
do not power off the device or exit the app
After the update is finished
the aircraft and remote controller will remain powered on
DJI Mavic 3 Pro has two different types of motors (A/B) and propellers (A/B) that pair up
Propeller A
which has a gray circle at its center
should be mounted on Motor A
which has a gray arc on its outer edge
Propeller B
without any gray circle at its center
should be mounted on Motor B which has no gray arc on its outer edge
Press the propellers down firmly and rotate to the lock direction until they click in place
Now
the flight preparation is completed
Please watch the tutorial video First Use Guidelines before you head out to fly