friends all the huge hello you on the channel do the most words with you alexey today with
you to expand the functionality of just such a gas burner, I think that not everyone
knows about such opportunities, what i will do, let's watch the video for everyone, enjoy
watching and do not forget to subscribe to the channel to comment, like to
whom I liked it, but I will show how I did it all went a piece of 25 pipe a
piece we clamp in a vice, we begin to crimp it turned out to be an almost flat round pipe a piece of
pipe with an edge made a marking zakirnil nil now I will drill a hole for 5 then I cut a thread m6
at about the same distance made a marking also on the ink now we will drill a hole
, I got it this way, but almost everything is the same, this is the kind of
thing now I will remove all the veins of the Misha with a file,
now this side does not need to weld a nut for 12 do that
in this way I will expose if I also need to create later a nut for 6
would start to use a green grinder fool
homemade if I want to process that floor a blank to fall and already a good view,
as a result, it turned out this is the beauty to whom someone already know what it will be okay, we
will tell you further we put it aside there is such an old soldering iron tip lying around its
intended use and now here it has come and the deadline is now we will cut a six-point thread on it,
as a result, we got such a little thing and abundantly in the light we remove the nut by
6 we wind it so that we can control it and now we turn it on here
we take a bolt and tighten the wounded lisa visit so that we can fix it
still try to launch it everything lights up now heats up the complaint we will try to solder something
so warmed up I made it to the very minimum you
can practically say no and now try to solder the wires with you,
that is, as you can see, everything can be soldered with trial errors, it turned out that the
sting sting about the money from which here initially the devil but you are a little worse
this is another sting but much better there will be this sting you can use
as well as not to infect we will try to solder the plastic between ourselves just for the sake of experiment,
even smaller plans can be made to cleanly maintain the temperature to
solder of course quite deeply with our hands not to break it now we will try to set it in a vise
and knock with a hammer of course I think with a hammer to distinguish everything anyway,
I just soldered without anything, but as if this is a pretty good result, so we
take on board we draw conclusions from such a small thing, it turned out quite a
useful thing, you can solder wires, you can also hurt plastic, we draw conclusions that the topic turned out to
be working for us I would add a little, I would make this corpse the tube not 5 centimeters,
maybe 810, I think about less heating from this tube, the author of the topic is a worker
for a minimum of gas, they saw everything working who liked this video, like who
did not like it, put it by like, but aside from jokes as friends whom I fought to the road to put on like
obya we definitely comment, write your opinion that you can add what can be redone whether it is worth
doing this at all or not, everyone is waiting for you feedback, you all hugged everyone
tightly shake hands with everyone who did not subscribe, be sure to subscribe and until new meetings so far