Hey guys; in this video; we're breaking down the five Best Bottle Jacks For SUV available
right now; We've included options for every type of consumer; If you want more information
on the best and most up-to-date pricing on the mentioned be sure to check the links in
the description below; Okay; so let get started with the video.
At #1 is The Alltrade Black 3 Ton All-in-One Bottle Jack.
This Jack made by Alltrade allows you to lift up to 3 tons and perform the feat at a height
as low to 11 inches.
It can raise the load up to 17.25 inches above the ground, or adjust the height to reach
up to 21 inches.
It can therefore lift more than twice its own height an impressive feat for any bottlejack,
and sufficient to lift the wheels of your pickup off the road.
The jack is equipped with an expansive base that helps ensure it's stable.
It also ensures that it won't pierce the concrete floor, cut through asphalt or sink into soft
materials in the event of repairs in an emergency.
The real benefit of this jack, however is that it comes with a built-in jack stand.Even
even with the most powerful jacks, make sure to utilize a stand for your safety.
The jack connects the stand and the lift together with a safety lock, which means that your
vehicle will not be able to move in the event that your hydraulic system fails.
The combination of the two means there is no dispute over where the jack should go and
where the stand is.
Moving Up At #2 is The Baoshishan 3-Ton Double-Ram Bottle Jack.
The problem with most bottle jacks is they are able to lift only the same height as their
initial height.
This is because it's the longest lifting bar that you can squeeze inside your jack's body.
The 3-ton jack made by Baoshishan features two hydraulic rams that are inserted into
the other, which allows it to go higher.
When it's not active, it's 6.5 inches in height.
It's big enough to fit underneath even the smallest crossovers and even the majority
of sedans.
Lift this jack up to its maximum height with both rams extended . You will gain more than
7.5 inches of lift.
Add the height of both rams and the screw top that can be adjusted and you'll get a
total of 10 inches of lifting which puts your car just 16.5 inches off the ground.
The motion range is ideal for vehicles with low ground clearance with suspensions that
are long-travel but is sturdy and able to raise pickup trucks as well.
At #3 On Our List is The Pro-Lift B-004D Grey Hydraulic Bottle Jack.
The 4-ton jack is easy and straight to the point similar to the trucks that will likely
spend their time lifting.
With the base height of eight inches, it's not tall enough for the majority of sedans
and smaller crossovers, but it's great for larger pickups and SUVs.
With the capacity to reach up to 15-3/8 inch lift, this jack features an extension screw
that can be adjusted so that it will save you a few pumps for the jack handle or give
you that additional lift height that you require.
The jack is equipped with an inbuilt bypass system so that it's not necessary to worry
about extending it too much when lifting.
The jack also utilizes the use of heat-treated steel in its crucial zones of stress to improve
the durability and strength to give you years of reliable service.
At #4 is The Torin Big Red Hydraulic Bottle Jack.
Torin puts its focus on the safety of users and convenience by introducing the bottle-jack.
It's a 2-ton jack, which means it may not be enough for most heavy SUVs and trucks however,
Torin includes an overload valve in case.
It will never attempt to lift a load that is too heavy, only to fail once your vehicle
is lifted off the ground.
Additionally, it has an escape route to ensure you don't go over the maximum lift height.
This jack measures seven and a half inches unextended, and it extends to 13 5/8 inches
when fully extended.
It also comes with an extension screw that can be adjusted on the top for more lift.
Torin states that this jack comes with the glide-action pump which is designed to require
less effort to raise your vehicle.
It also comes with quality hydraulic oil to prevent corrosion and allow the jack to perform
better in low and high temperatures.
This means that it is prepared to be used at any time.
The Fifth Product on Our List is The Performance Tool 20-Ton Hydraulic Bottle Jack.
This is the type of jack you'd choose in order to raise a tractor, a large trailer, even
the bulldozer, or even your home.
It's got a huge capacity of 40,000 pounds to lift almost everything off the ground.
Despite its massive weight, the jack is only 9 by 1/2 inches tall when folded, making it
fit underneath your heavy equipment.
It can also let it slide underneath your pickup in the event that you don't have a second
Jack around.
Once installed the jack can raise up to 17 by 3/8 inches lifting the heavy objects off
the ground.
This jack comes with a patent-pending bypass device that ensures you don't attempt to lift
it too high.
It's also made to be in line with or surpass standards set by the ASME Standard for Jacks
in order to provide you with more security and security.
This jack comes with a "shorty" for lower-height applications and also with capacities of 30
and 50 tons.
So that sums of the today's video.
We hope you enjoyed and if you did please leave a like on the video.
and if you new here hit that subscribe button.
Until next video have a great day!