ladies and gentlemen good morning this is Keith from iRepair Autos today I'm
gonna be showing you how to switch out a button on your control for your window
these tend to break usually when you're pulling the window switch up so your
window is down and you're trying to pull it up you pull it too hard and it breaks
the window doesn't go up you're stuck with that window that's halfway up or
halfway down however you want to look at it so I'm gonna show you how to do that
gotta take a button from another window or order a new button I have a part on
the description to change that piece out rather than the whole unit hey but
before we get started with this video if you haven't please subscribe share and
like this video it helps with the ratings on YouTube so other users can
see find them enjoy the same videos that you find helpful thank you
so this exemplar is gonna be on ml350 and I'm gonna go to the you know the
driver's door and I'm gonna show you how to remove the switch using a flathead
screwdriver this isn't a case where it may have been broken on another side I'm
just gonna pop that open just like that so that's how you remove it to use it
for another one in the case where your lever is broken like in this case your
button is broken you can take the button from the top or you can even take the
button from the rear door but in this case I have the replacement button that
I just showed you and I want you to pay close attention this little
not right here that there's one on this side it's supposed to be one on the
opposite side usually when these break one or two of these will break if one
breaks and you have another one then you're in luck because the new piece has
a little Ridge on the inside where it just rocks back and forth it's a rocker
so you're gonna then take the button and you're gonna put it in position and when
you put it in position it will sit nicely on the rocker take your time you
don't want to break anything that's it it's in position and it will put your
window up and down and I'll demonstrate that in a minute all right once the
button is in place put your key in the ignition position to test up button
oh yeah it's down that's up
works down
you would pop an existing button from the top portion of the control if you
broke the button for the rear or vice versa while traveling we really want to
replace the button you don't want to move them around but this is only when
you're on the road going somewhere it may even be raining or whatever and your
window is down so that's why we popped it as always everyone don't forget to
Like share subscribe to my channel if you find these videos helpful what that
does it pushes my videos up in the search results so that other Mercedes
owners drivers do-it-yourselfers can find them easier thanks and peace out