Have you ever wanted to change the silhouette of an existing pattern? Today
I'm gonna share a super simple pattern making technique that'll show you how to
change the shape of a garment. Hi, I'm Haley and I'm the designer here at Seamwork.
You can find us at Seamwork.com. We're a community of sewists that are all about
designing and sewing our own wardrobes, so be sure to check us out at Seamwork.com
I am seriously obsessed with pattern hacking! Rarely do I make a
pattern without some kind of modification to the design, and one
technique that everyone should have in their pattern-hacking bag of tricks is
slashing and spreading. Slashing and spreading is a cornerstone of patternmaking
and by learning this technique, you're gonna open up a whole new bag of
tricks when it comes to pattern hacking. Today, I'm gonna be making a simple
trapeze top, but we'll be learning all the basics like what is slashing and
spreading, how to choose a pattern, how to slash and spread, plus I'll give you some
ideas on how you can take this technique and apply it in a bunch of different ways.
So, what is slashing and spreading? sSashing and spreading is a patternmaking
technique used to add more volume to a garment. You can use it to add
pleats, gathers. or even sweep. With this technique, you're gonna strategically
slash your paper pattern to create more volume, so you can change the shape of a
sleeve, a bodice, or even a dress. I'm going to show you how to use the slash
and spread technique to add more sweep to a garment.
Sweep is just a fancy word for the circumference of a hem. We'll be using
the Elli henley to create a trapeze style top, but before we get started I want to
give you a little preview of the hack and give you some customization ideas.
This is what the Le Henley looks like straight out of the envelope. You can see
that it's a pretty fitted-style Henley tee with a center front placket and
fitted long sleeves. And this is what the original pattern piece looks like.
You can see how fitted this pattern really is here. And once we're done with our
hack today, we're gonna end up with something that looks a little bit like
this. You can already start to see how drastically the shape of this pattern is
changed. I want to show you a couple of examples of how you can take this
technique and apply it to different patterns. In this example here, I used the
same bodice but started the volume at the waistline instead of at the bustline,
to create more of a fit-and-flare style silhouette. You could also used this same
technique on pattern pieces like sleeves. I have two examples here. In this first
sleeve, I added volume beginning at the elbow
and then continuing down towards the sleeve hem to create a bell shaped
sleeve. And in the second example, I created a flutter sleeve. To do this, I
just slashed and spread up to the cap of the sleeve to create this silhouette.
These are just a few examples of how you can use the slash and spread method but
you can already start to see how versatile it is.
While pattern hacking allows you to break the rules, some patterns are just
going to work better than others. If you're new to pattern hacking, you might
want to stick to knit garments just because they tend to be a little bit
more forgiving. But, if you're more of a wovens type of person, you can do that
too you'll just want to stick to things that are simpler in design with fewer
pattern pieces and less shaping. I'm gonna pop some links below to our
favorite hackable patterns so be sure to check those out. Once you've chosen your
pattern, you are ready to get started we're gonna start by tracing our pattern
onto a fresh piece of paper. This is because we want to maintain the
integrity of the original pattern, just in case we want to sew the original
again in the future. When you're tracing, make sure that you transfer all of your
essential marks such as notches, labels and grainlines. Next, we're going to
determine where we'd like the volume to begin increasing. This is essentially
where your garment is going to start flaring out. For the purpose of this tutorial
we're gonna call this the baseline. And since I'm making a trapeze-style top, I
want the volume to begin increasing at my bust line. So, I'm going to take a
clear ruler and a pencil, and I'm going to draw a line perpendicular to the
center front right along the bust line. On the Elli,
this is going to be approximately—like about an inch—below your placket. Clear
rulers are a really essential patternmaking tool. In patternmaking, we use
them to mark parallel and perpendicular lines and to add things like seam and hem
allowances. They come in a bunch of different materials and dimensions, but
what I really like is a 2 inch by 18 inch clear ruler.
I just find it more useful and it's really great for being able to navigate
around curves and measure things like that. Once we've established our baseline,
we can start marking our slash lines. You're going to take your clear ruler,
and you were going to start by marking a series of parallel line, parallel to the
center front, right below the baseline that you just marked. We are going to
start by cutting along our basline. We're going to take some paper scissors,
and we're going to cut along the baseline, starting at the center front, and then
moving towards the side seam. Stopping just short of the side seam, leaving a
small paper hinge. Once we've cut that, we can cut our slash
lines. For the slash lines, we're gonna cut from the hem up towards the base
line, again leaving a small paper hinge. Once you're done cutting, you can really
start to see your future pattern take place. While the slash lines allow you to
open up the pattern and create volume, the baseline controls precisely where
that volume begins. Now that our pattern is all slashed, we're ready to start
finalizing it. We're first going to start by taping things down. So, I've placed a
piece of pattern paper underneath my slashed pattern, and I'm gonna start by
securing the upper portion of the bodice— the unslashed part—to that piece of paper.
I'm just gonna use some scotch tape to do that.
Once that's taped into place, I can start messing around with the slashed portion of
my pattern to play with volume and create the shape that I want to make.
This is where I really like to use pattern weights.
I just bought some oversized washers from the hardware store,
and I use these to help me hold everything in place and visualize the
pattern before I tape anything down and finalize it. This is where you can
really start to have fun and start visualizing what your finished garment
is going to look like. If you're trying to create more of a subtle shape, you'll
just want to open up between your slash lines a little bit, but if you want
something more dramatic, you can definitely create a whole lot of volume
by using this technique. I'm adding between 1 and 2 inches between each
slash line to create that swingy trapeze kind of shape. Once I'm happy with the
shape, I can start taping everything in place. Once you have everything taped in
place you can start to finalize your shape. I'm going to use my clear ruler
again and I'm gonna redraw the center front—just following that original
center front line of the upper bodice.
Once I have that, I'm gonna use a curved ruler to redraw my hemline and also to
reshape my side seam just a little bit. If you've created a more dramatic sweep,
you might have a little bit of a wonky side seam and you'll just want to soften
that curve a little bit. When you are redrawing your hem, you're gonna want to
follow the same line of your original pattern piece. It'll be pretty obvious,
and the clear ruler will help a lot, you just want to smooth it out a little bit.
Once you're done redrawing those lines you can go ahead and cut out your
completed pattern hack, and then go ahead and apply those same changes to the back of
your garment as well. After cutting and sewing, this is the garment that I ended
up with. I love that with just a little bit of pattern paper or tape and some
scissors that I can create something that I really love. If you like this
pattern hack, be sure to check out a feature we do every month in Seamwork
called "Pattern Hackers." We share three hacks for that month's featured pattern.
Be sure to subscribe to our channel for more tutorials, techniques, and tips, and
follow us on Instagram to stay up to date on all things Seamwork.
Have any pattern hack requests? Comment below and tell me what you want to see.
Thanks for joining me and happy hacking!