Hey, everyone, it's Dylan from The Black Forest Wood Company
this week we're going to be working on the heaviest eight-foot table that we've ever made
it used over 250 litres of resin and we think it weighs somewhere around maybe seven or eight
hundred pounds in that ballpark and you're going to get to see us struggle to move it around a bit
and do the pour and work on the piece so I hope you guys enjoy this video
thank you for always watching and if you can leave a like or comment below that really helps us out
I made two edges
come on man
is that it? No? Why!
come on one way or another
for how high this is off the table it's still stuck somehow oh that tape came up
if we slide it around here we can get it down and tip it up on a cart maybe
I don't know how it's going to be I have no idea I don't think
we're just going to lift it over these yeah I think it'll slide better on them
so I'm not gonna pull
actually, maybe we can get it out of here on a cart
if we can maybe get it up on some dunning so if it clears these we can maybe skip through
here probably not
that's heavy but that's not the rock side
great
so it hits that then you should be able to kind of slide it over
very well
just getting this done yep
and push it through with an arc over there you guys guide it
are we okay
oh my god that's stupid yeah they'll probably need like eight people to safely move that in
yeah we're shipping it we don't got to do this not our problem yeah
that's insane okay I didn't realize it was that bad so this thing because we have put
so much resin, uh and a lot of river rocks in this piece we figure it probably weighs
maybe about 800 pounds I'm not saying I can lift 800 pounds like that but it is still supported on
the other end so it might be a bit less um luckily though like spencer and I said we're shipping this
so we don't have to worry about the delivery this is a piece of cottonwood burl so we got this from
gel veneer and it's very thick so that's part of the reason that this table is so heavy as well
there's going to be a lot of fills that we have to do here on this piece but this is
the underside so we'll flip it over and check out the top probably next week but I would say
this is the heaviest eight-foot table that we've ever made and I'm just calculating the resin now
what we used it was 225 litres for the final pour and then the base layer I think was about
30 litres so we'll say 225 plus 30. we're over 250 litres of resin alone in this table so again
whenever we're using that much resin it's typically on like a 20-foot table so
this is quite the crazy piece we've got the table this far we managed to get it downstairs
and we've actually got it CNC flattened as well so we've done both sides now what we're
going to do is pump it through our big sander here that's just going to clean off a lot of
these CNC marks and then we'll be moving on to our final sanding and finishing and the base
creation we're doing a trestle base on this one so we're actually going to be constructing that
hopefully it can support the weight of this table but if you guys want to see that we'll be showing
that probably in next week's video so thank you guys for watching and we'll see you next week!