- Hey, what's up guys?
Welcome back to an episode of Chemical Guys Detail Garage .
Unfortunately, it's raining outside,
so we thought it was a great idea
to stay inside the vehicle
and show you guys how to properly clean
and protect your interior vinyl, rubber, and plastic.
We'll start off with a, nice piece of tape
down the middle.
As you guys can see it.
I'm going to give you guys the before effect,
an after effect.
To start off with i already have my brush here
Detailing brush, and I'll be pairing it
using Nonsense Super Cleaner.
Nonsense Super Cleaner is an all-purpose cleaner.
That is going to deeply clean the vinyl and plastic
surfaces on my dashboard. So like this,
whenever I apply a dressing like VRP,
it's going to Bon properly.
So instead of spraying directly onto a dashboard
I could spray it directly onto the dashboard,
but I want to avoid over-spray.
I'll just spray directly onto my Boar's hair bristles,
and then I'll go to the area I am cleaning and I'll just
agitate it. Side-to-side so, as you guys can see nonsense,
super cleaner immediately starts to form up.
That is the reason because it is clean and getting into deep
grooves of this dashboard. So just clean it.
Side-to-side, spray a little bit more.
Start at the top and after you're done cleaning,
that is when you will proceed to apply your dressing such as
VRP onto your dashboard.
So just clean it thoroughly.
And once you're done cleaning it,
you'll get a clean microfiber towel.
So you could wipe off any residue,
rip off any tags, like this.
I don't scratch or damage the surface.
I'll wipe it one direction.
Buff off any residue.
So like this, by cleaning it, using Nonsense Super Cleaner.
I ensured I went ahead and cleaned it properly.
It is not going to,
it is now going to allow VRP to bond properly to the
surface. So I'll be using VRP.
The reason why I went with VRP is, one it is a water based
dressing.
A water-based dressing is going to not cause a oily feel to
it.
It's not going to cause a glare and it's going to give it an
OEM factory, look to it.
So just shake up the product, open up the spout.
I'll grab my microbes applicator.
I will apply two lines onto it.
And now I'll go to the area I'm working on.
I'll blotch it out and I'll just work it side to side.
So how I like to explain this is VRP.
It has UV protection on it.
UV protection is going to avoid dashboard cracking,
it is going to avoid discoloring and like this,
your dashboard lasts much longer for much, much more longer,
especially cause this is a Ford transit.
This Ford transit constantly goes on road trips.
So we want to ensure the dashboard on this Ford transit is
fully cured, fully protected using VRP.
And we also cleaned that up with nonsense super cleaning.
So after rubbing it on, VRP is a water-based stressing.
Just like I said, it is dry to touch.
It is not oily. It's not causing the glare.
So if you do have any leftover,
just to have a clean microfiber towel, wipe off the residue,
you remove the tape.
So you can see a 50/50.
Let me just clean up the line real quick.
And you guys can see a big before and after over here,
it is dull ,over here,
It is not protected, it looks straight from the factory,
so like this, and when to use the steps,
I cleaned it and protected it. So guys,
if you guys like this video today,
and you want to turn your dashboard from this, to this,
you go hop onto our website right now ChemicalGuys.com,
and you can pick up your products today. Remember guys,
the products I used today was Nonsense
Super Cleaner to clean it and then VRP after to protect
it. So guys, like I said, if you guys liked the video today,
don't forget to give it a huge thumbs up comment down below
on featured videos.
And we'll see you guys next time right here at the
Chemical Guys Detail Garage.