[AUDIO LOGO]
Hey, DIYers.
It's Jarrett here from Alarm Grid.
Today we're going to be going over which cameras
are going to work with the Honeywell Lyric
system and Total Connect 2.0.
Now, there are two different types
of cameras that can work with either one of them,
and that would be the Honeywell HD cameras or the Honeywell
Legacy cameras.
Now as I said, they're both going to be able to work.
Now, there's a few differences between the two.
Now, the HD cameras are comprised
of the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and then
the IPCAM-WOC1.
And we have the WOC1 right here.
This is the outdoor camera that they have.
And this is an HD camera.
Records at 1080p.
And it also does have night vision.
Actually, all the Honeywell IP cameras
have night vision built in, so.
But this is the outdoor camera.
As you can see, this is the little antenna right here.
This is so the camera can connect to the Wi-Fi,
and it does need to connect to power so that you can
go ahead and use this camera.
Now, we also have the WIC1.
This is also a high definition camera.
However, this one actually records at 720p.
It doesn't record at 1080p.
But this is an indoor camera, so not meant for outdoor
and it does connect to your local Wi-Fi.
Now, we don't necessarily have the WIC2 at the moment.
But I will be showing you a picture of that in a bit,
so at least you can have an idea of what it looks like.
But that is also an indoor camera,
and it does connect to your local Wi-Fi as well.
It needs that power source in order
to be powered up, but other than that it
is a very useful camera.
Now, the HD cameras are very good,
especially if you want some good quality picture,
but there's a few things I want to keep in mind.
You will not be able to view the cameras on the main panel
itself.
That goes for all three of those cameras that I named off.
And they can only be viewed within Total Connect 2.0.
Now, if they do pick up any motion detection
or if they start recording, it will send you notification
through Total Connect, but you will only
be able to pull up the live feed or video
feed through Total Connect 2.0, not the main panel.
Now, there are the Legacy cameras which
are comprised of the IPCAM-PT2.
You have the IPCAM-PT.
You have the WI2, WL, and WO.
They all start with IPCAM, so I just abbreviated it.
But basically, we have the IPCAM-WL right here.
This is an indoor camera as well.
You can use an ethernet cable with it if you wanted to.
But this is not meant for outdoors,
so you want to keep that in mind.
The other one is the IPCAM-WO.
This is actually an outdoor camera.
It has a little antenna here to connect to your Wi-Fi.
You see you have like a metal backing right here
to protect against the weather.
This is a pretty useful camera as well.
And you have the WI2.
This is an indoor camera.
It has the antenna for the Wi-Fi and everything.
Basically, this is just another standard Honeywell IP camera.
And then you have the IPCAM-PT.
This is also another indoor camera.
It connects to your Wi-Fi.
Now, we don't exactly have the IPCAM-PT2.
However, to give you a general idea of what it looks like,
it looks exactly like this.
Really not much of a difference between two cameras.
They both really look similar, but I will also
be pulling a picture of that too to give you
an idea of what it does look like,
even though you already do.
So basically, the Legacy cameras are not high definition though.
You want to keep that in mind.
They're actually standard definition.
I mean, you're going to have some pretty good video feed,
but they're not going to be quite as high quality
or good as the HD cameras.
Now, one good thing about the Legacy cameras
though, is that they can be streamed on the panel itself.
So if you wanted to pull up a live stream or anything
right there at the panel, you can go ahead and do that.
They can also be viewed via Total Connect 2.0 as well.
If they start recording or pick up motion,
it's going to be the same thing.
You get a notification from Total Connect
and you can go ahead and pull up that video feed if you need to.
One very important thing about those Legacy cameras
though that you really want to keep in mind,
is they will only work with Total Connect 2.0
and with the Lyric panel if they received an over the air
update that was pushed out a little while ago.
This update was the last update that Honeywell pushed out
to these cameras so that they can
work with Total Connect 2.0.
If they have not received this update,
then they will not be able to work.
They're not going to connect to the system,
not going to work with Total Connect 2.0.
At that point, you would probably
have to swap them out with either the HD cameras
or another type of camera.
So the other cameras that are basically
not going be able to be used are like any DVR cameras or NVR
cameras.
The Arlo cameras are also included with that list.
Basically, if they're not Honeywell
or if they're not the Skybell cameras,
then they're not going to be able to work with the Honeywell
Lyric.
Now, there are other types of Honeywell cameras out there
that are available, but the only ones
that can work with the Lyric or Total Connect 2.0
are going to be the ones that I named off.
Whether it be the Legacy ones or the HD camera ones.
If you get like a Honeywell DVR type system,
those are not going to be able to work either, unfortunately.
So you want to keep that in mind when you're setting up cameras
to try to use with the system.
We do see a lot of people though set up their own cameras
and they use Total Connect and also the other application.
But whichever one you choose, by all means,
you could definitely do it.
If you did want to set the Honeywell
cameras with your system, then you
would need to look at a monitoring plan that
does include the cloud storage for those cameras to be set up.
So for instance, if you're a Alarm Grid customer or a person
looking to monitor with Alarm Grid,
then basically the Platinum Plans
or the Self-Platinum Plans would be the ones
that you can go ahead and choose,
because those do include that setup for those HD cameras.
And you can set up about eight cameras on that account.
It also does include the five Skybell cameras as well,
if you did want to set that up.
And the last thing, though, that I
want to add about the Legacy cameras and their update.
If you wanted to see or read a little more information
about that update that I had mentioned,
just follow the link in the description below
and that should be able to take you to the FAQ
that we have that explains everything.
OK.
So as I mentioned, I'm going to show
you a picture of the Honeywell IPCAM-PT2.
This is basically the camera right here.
It does look exactly like the IPCAM-PT.
It basically connects to the Wi-Fi.
It is still an indoor camera.
But this is also a good option if you
wanted to have a camera that can pan and tilt
so that you can get some different views
and different angles for where you're looking at.
All right.
And lastly, this is the Honeywell IPCAM-WIC2.
This is the HD indoor camera that you
can go ahead and use with the Honeywell Lyric or actually
Total Connect 2.0.
But again, you want to keep in mind
this will not be able to be viewed directly
on the Honeywell Lyric.
It can only be viewed within Total Connect 2.0.
And that is which cameras work with the Honeywell Lyric
and Total Connect 2.0.
If you have any further questions about the Honeywell
IP cameras or alarm systems in general,
please reach us at support@alamrgrid.com
or go to our website, alarmgrid.com.
If you found this video helpful, please like and subscribe.
If you want notifications of YouTube videos,
please click the bell icon.
This is Jarrett with Alarm Grid.
You have a great day.