Hi guys, Today, I will show you how to make the second
generation of the Secret Bomber.
To make the Secret Bomber, you need a printing paper.
You can use either U.S letter size or A4 paper.
So lets start now!
First step, I fold the paper in half, and then unfold the paper.Next step, I wills tart
from the intersection of the center crease and the top edge; fold it straight down to
this corner.
And of course, I will repeat the same fold for the other size.
I make a very nice crease here, and I repeat the same fold for the other side.
And then, I fold the paper in half to create the center crease again.
After I finished folding the center line, I start from this edge and fold it to the
center crease.
Basically, I can fold this flap to a side, and I can fold the other one to the other
side, so the paper can look very nice like this.
And next step, I can start from this edge, fold it to the center crease.
I will turn the paper this way, so I can fold the paper easier because I'm right handed.
And now, I'm going to create the wings, by folding this part out.
When I fold out, I estimate about 1 cm above this line, or you can say almost 1/2 an in.
So I will do it now.
Also, when I fold it, I fold it slowly to create the stabilizer at the same time.
I will match this edge to the edge on the bottom, and the distance from this corner
to the crease or the edge is about 1 centimeter.
This is how we create the stabilizer, and I repeat the same fold for the other side.
Fold this one in, and I fold this one out as well.
So to make the wings even, I will fold the paper in half like this, and I will flip the
paper over, and now, I can start from this edge, I match it to the edge on bottom.
It is a little bit confusing, so if you have difficulty to fold the wings, just a re-watch
the tutorial.
Now, I will open the paper.
You can see the paper like this.
I fix it a little bit, too to make sure the wings are even.
Now, I fold the triangle shape down.
I will use this point, this inter section here.
You can see this point right here as my reference to fold.
You can see the edge here crosses the edge over here, so use it as your reference to
fold.
If you do not fold it correctly, the plane will not fly well at all.
make sure that all creases are matched.
I fix it, and I make a crease here first.
You can see this triangle shape here, I will fold it up, and now, it looks very interesting
because we have this part of the paper.
I just fold it in.
It depends on your paper so it might be very hard or easy to fold.
It depends on the thickness, So after I fold both sides, I fold this triangle shape up
to hold both sides together.
It looks very nice, and next step, I will fold the paper in half.
Just fold it in half!
On the following step, I'm going to create the wing, by matching this edge to the edge
on the bottom.
Just curve the paper and match all edges.
Okay, and then I just fold this part down.
I will make a very nice crease here.
You do not need to press it so hard.
Just make a crease, and then repeat the same fold for the opposite side.
Curve the paper, and make the crease.
Make sure that this edge match with the edge on the bottom.
Okay, and then fold, matches and then fold it.I also fix this part of the paper as well.
After you finished that you can see the top looks very nice so far, so we do not need
to fold more . And next step, we are going to create the stabilizer.
I fold it up to create the stabilizer.
So at this point, it ( the plane) looks very similar to the previous version., and of course,
it depends on the paper you choose and how carefully you fold either the plane will fly
well or not.
Si I will fold this one up first.
You can see the stabilizers look very nice and the plane looks nice too, but the plane
might not fly well at all.
It is very important that you create the elevator right here, so I just curve this part up a
bit, and I will do that for both sides of the wings.
Make a line, and curve it up.
You can create two more stabilizers to help the plane fly better.
I can start from this side of the paper and I can estimate about 1/2 in or even more than
that.
I fold it straight to the center, and make sure this edge is parallel with the stabilizer
down there.
I will show you slowly now.
I will fold the paper in half, so I can create the other stabilizer easier.
Make sure that all edge are lined up first, and then I just fold the other side down.
Here you go, I just created 2 more stabilizers to help the plane fly better.
And here you go, this is the second generation of the Secret bomber.
You can call this plane the Super Secret Bomber.
You can check it out.
Make sure that you curve the elevators up for both sides.
If the left is more, the plane will fly toward the left or the opposite.
If this this plane flies well, give the video a thumb up, share it with your friends and
subscribe my channel.
Finally, thank you for watching, and see you guys next time!