Hello people, welcome to this video! We are going to see how to improve
photos and images with
Check the index in video description to find what you are looking for. Don't forget
to leave feedbacks to improve us!
Let's suppose to have this picture to improve, which is taken on purpose, in
this way. We can distinguish different phases while improving a photo or and
image. The first one is to
must be made. Make sure to have unlocked the layer first. If so, just
double-click on it and convert it to a new layer. This will have your photo or image in.
Then select such layer. In this way you will transform the image.
You find anything going to
basicly use the
edges to rotate the picture.
You can drag its centre to move it as well.
important inclinations. When you are done, just click on
above. Remember that you can delete a mistaken action pressing
going to
Once setting the orientation, you may want to cut what it is not needed, so you
need to
Selection Tool
Then we can simply delete the old layer using the
then going to
This is how you can enlarge a picture.
Mind that
Indeed, if you enlarge a very small picture, this will come up totally
Plus,
enlarge it again, you risk to lose all its previous quality. So mind to scale the
image if you are sure, and if it's really necessary.
Right not to lose quality, to crop the photo you use the
Dragging the edges, you select the part of the photo to save and the parts not
interested. All outside the highlighted area will be cut off. The
scale the image, since
While in
Go to
is useful to remove the
a photo, or simply want to give a different point of view.
At this point, the fundamental parts are done. So just save a copy of this photo
before retouching it. Just in case you totally mistake or you want to start all over.
You can simply right-click on the layer you have, and go to
Now the following phases. Mind that the order doesn't count at all. We can adjust
the image with two different approaches: applying the adjustments on the whole
picture or on just a part, depending on how and what you need to correct, that's up
to you! If you want to apply the effect
But if you want to apply it just
then you can add the effect.
If you need help in
Even more, there are two ways to add the effects. The
effects
that you can hide or delete anytime through the
decides the area where the effect must act, and this will be applied
that are lower in position.
Another way is using the
Filter
This is right designed to adjust photos. However, this is different that using the
Adjustments window
Once you apply with
just undo them to obtain the original photo. So just apply when you are really sure.
Indeed, the
case you want to apply just single effects per time.
Now the second phase. Let's adjust the lighter and the darker parts of the photo.
Make sure to have selected the layer and then open the
So we will start adding
lightest parts of the image, to make their colours more uniform in intensity.
Under the section
and
Click on the preview to check it better.
You can zoom out
Important is the
the colours are distributed, such as main and the secondary colours. White means that
the colours are overlapped. A colour that goes more on the right, is a colour
that is becoming more intense.
The third phase is to
you can increase
Detail section
and edges in the way we like most. You may need to
The forth phase is to
Basic section
Each of them adds or removes colours in a different way, simply observe how your
preview looks like, to pick the best effect and colour. If this isn't enough, and you
want to add more intense colours, simply go to the fifth icon, in the
section
you can add the colour you like most.
the colour to add in.
and the second saturation must communicate.
Very useful is the
an area that includes the whole eye. Photoshop will detect it auto and will
correct it.
At this point, you know all you need to adjust your photo properly. Once finishing,
go to
again.
In the
except the
Very well! Check the next video to know how to add
to your image. Thanks for watching!