These are the TruFiber Carbon Fiber Window Switch Covers for the 2015 and newer Fastback
Mustang.
You're gonna wanna check these out if you're looking for a way to add some carbon fiber
to the interior of your car, whether it be a standalone piece or to help tie in other
carbon fiber accent.
These are easy to install.
They just clip into place, and they're a direct replacement for your factory covers, and they're
made from real carbon fiber.
The install is easy.
It's a one out of three wrenches on the difficulty meter, and you can expect to spend about 20
minutes getting these on the car.
These are made from real carbon fiber, so you get that nice real carbon fiber look.
You won't have a knock-off type of look.
These are made from a 3K two by two twill weave design.
The covers are vacuum-infused with resin, which helps to add strength and have a gloss
finish.
So from far away these almost look gloss black, but then when you get close, you can see that
they're carbon.
These do have a clear coat finish to help with UV protection, but one thing I'll say
about carbon fiber, and I say it for all carbon fiber items that I come across, not just for
certain brands, but if you like this finish and you want to keep your carbon fiber part
shiny and glossy and new looking, you need to keep them waxed.
The wax is gonna protect the carbon from sun damage and keep it looking perfect.
So, just keep that one in your mind for thoughts, even though these are on the interior of the
car.
If they were mine, I would wax them every once in a while.
If you're gonna spend the money on carbon fiber, you might as well take good care of
it.
These are direct replacements, so they're very easy to install.
You just transfer over your factory switches and clip these covers into place.
They'll fit any 2015 and newer, including the 2018, and of course all models, so the
GT350, the GT EcoBoost, and the V6.
As far as price, you can expect to spend just about $250 for these covers.
The first thing I'll say about that is that they are real carbon fiber.
Carbon fiber is pricey all the way around, no matter what you're buying, so I'm not surprised
to see a higher price tag here.
The install is a one out of three wrenches on the difficulty meter and should take you
about 20 minutes.
Let's head over to an install bay, and I can show you how it's done.
All right, so, the first thing we're gonna do is we're gonna get a trim tool and we're
gonna gently pry up on our trim piece here so we can pop this off.
All right, so once you have it pried up, there's two things to keep in mind here.
One is you have your electrical connection right here, and that's just the normal push
in your tab, pull out on your little connector, and you'll be fully disconnected.
The other thing is there are two blue clips that you're gonna need to transfer over from
your stock trim piece to your new carbon fiber trim pieces, so I still have one stuck in
the door here.
One came off with the trim piece.
I'm gonna set that aside now.
I'm gonna pull out this other little piece that got stuck in the door just so I can transfer
that over to the new trim.
These little guys right here.
In order to get our switches off of our trim piece, there are three little Torx bits that
we're gonna need to remove so that we can swap over in the new carbon fiber trim piece.
So, there's our...one right here, and there are two down here.
So, we're just gonna remove those real quick.
All right, so, once we have those out, just separates, and we're ready to install our
switches into the new trim piece.
So, now we have our driver side carbon fiber trim piece, and we have our switches, and
they're simply just going to line right up.
They look like that.
And we're gonna screw our little Torx back in.
One thing I will say is that you don't want to over-tighten these because you don't want
to take the chance of cracking your new trim piece.
You don't really need a whole lot of strength going into this, so your switches will stay
in place just fine.
All right, so our switches are now in place.
Gonna transfer over my two blue clips.
Those are gonna go right up here in the top.
My second blue clip's gonna go right here in the middle.
I am then going to plug back in my electrical connection, then flip this over and push it
down into place.
And that's literally all it's gonna take in the install, and the passenger side's gonna
be exactly the same.
And, before I finish up, I'm going to just test these and make sure all the buttons are
working correctly, just to make sure and be safe before I start driving my car.
That's gonna wrap things up for the TruFiber Carbon Fiber Window Switch Covers for the
2015 and newer Mustang.
As always, you can check them out more online right here at americanmuscle.com.