what's up guys
welcome to part two of the watercooled build
electrobox
that's what I'm calling it
uh, if you guys missed part one make sure to watch it before you watch this video
because you will have no idea what's going on
but anyways in this episode, we are going to be putting on the GPU blocks
on the GTX 1080 from EVGA
so I think that's what we'll focus on for this episode, if there is time
uh, maybe we can put the motherboard inside the case and put on the reservoirs as well
I'm sorry the radiators
um after that, but anyways that will depend on how long this video takes
I'm so sorry for dragging on the first video so long I had no idea it was going to be nine minutes long holy crap
so, I'll try and make this as shorter
I'll try and make this as short as possible
so let's just begin
alright, so I guess we can start by disassembling the graphics cards first
I've taken apart a lot of graphics cards before so this is definitely not new to me
I just haven't really completely taken it apart which I'm sure is what you need to do
to put on this block so this is definitely interesting guys I'm very excited to do this because
I love trying new things ya know? and this is definitely going to push this into the next level
so, that is why I'm so excited
oh, it even comes with a little uh, diagram so that's pretty cool
so this is what a GPU heat sink looks like in case you guys have never seen one before
gonna put this parts
in here
along with all the screws so I don't lose them
first things first we gotta wipe off the thermal paste because we're gonna be putting on a fresh coat
alright guys so I finally finished the first GPU block
that took me about an hour to get this thing together
hopefully the next one uh the second one shouldn't take as long but
yeah, this thing looks pretty bad-ass, nice and stealthy with the uh, all black look
the yellow is definitely going to pop in this build
got some finger prints on there I'll clean it up
definitely liking the way everything is turning out so far so good no complaints no complications
so yeah let's go ahead and put that second one on
and see what's up
(one hour later)
alright guys so the GPU blocks are finally completed uh, it took me about two to three hours honestly because I kept making mistakes so I had to come back
or go back and redo some things but
real all is the process itself was pretty easy
uh, now that I got the hang of it next time's gonna be a lot easier so
yeah I mean
It's pretty much it I'm actually going to end the video now because
I'm exhausted and it's getting late over here
and in the next video
we're gonna put the stuff inside the case
and then work on the
uh, readers as well
as always if you guys enjoying watching the build log make sure to leave a like to show your support
and make sure to stay tuned for part three coming next week
thank you guys so much for watching and I will see you in the next video