Hey guys! Rolando from ReveMoto here. Today we're going to be working on a 2019 Honda CRV
end cap. It fits from 2017 to 2019. uh if you guys like this video go ahead and like, and subscribe
to our channel. Turn on the push notification and hit that like button. And also if you guys need
any pre-painted auto body parts, go to ReveMoto.com. Let's go ahead and get started on this vehicle.
All right, so first thing we're going to do is going to go ahead and open up that tailgate.
All right as you can see on top right here, right here,
right there, there's a bolt right there and a bolt down here. So that's gonna be a T30 torx bits.
Ah, so they look like that so the next thing we're going to do is going to go ahead and uh
move to the side. I'm going to take off the trim pieces over there, all right with a
Phillips screwdriver like this. There's gonna be a screw right down here. Let me get you guys a
little bit up closer. That's where that, uh bolt, or that screws right there. I'm gonna take that off
it looks like that
all right so we're gonna remove this trim piece right here open the door
it should come right off
so that's how it looks like so we're just getting it off this clips right here
but if this thing falls off let's go ahead and insert it back in
so right here you're gonna take it off with a phillips screwdriver right here
and also if you guys have a pattern remover tool like this or if you guys
have a flathead screwdriver that'll work also right here so let's go ahead and take this off
so it looks like that
and that looks like that
so you can go ahead and uh use some force
so right underneath here is going to be another screw i'm going to go ahead and take that off
it looks like that
all right now that we're done with this side i'm gonna go and go to the other side
and go ahead and do the same exact thing all right spoke too soon we're actually missing a trim piece
right here so it's not the exact same thing but if we did have the trim piece it will be the exact
same thing as we did on the other side so since we already have the trim piece off i'm gonna go
ahead and take off the screw right here and also the little tab right there all right since we've
only taken this piece off we're going to go ahead and put our arm right here and pull right here
you just hear that clip coming off
we're going to go ahead and pull the same way we did on the other side
all right guys if you guys need the whole bumper taking off
all you guys got to do now is go down underneath here
there's going to be two more two or three more clips and they look like this and they're just
one right here and one right here so two to four rough roughly around the area all right so we're
gonna go ahead and pull it back a little bit i'm gonna use this tool right here to take off those
clips all right so right behind take this tool right here or two flathead screwdriver
and take that clip off
back
all right there you go your end cap right there
so basically all it is is that there's clips that you're trying to pull back on from here
all right so now we got our brand new one all you're gonna do is line it up with the holes right
here all right so we're just going to go ahead and line up the holes right here with these clips
get that clip right there
put it back in place all right so not that that cap is
fixed I'm going to go ahead and put the bumper on so make sure it goes over this rail right here
push it into place
all right so we're gonna start with one side we're gonna clip it back into place
put the screw right here and also the screw
down there
let's get started
don't forget about that trim piece
so make sure you line up the wrong holes first before you start
and on this end right here it's going to go behind the mud flap or the fender liner
i'm going to put the screw down there remember the mud flap goes underneath the bumper
all right same thing on this side we're gonna go ahead and uh clip it into place
and we'll put the screws
the push pin right here and also the pin down there
so i was going to put this uh screw down here all right i forgot the customer still needs to bring
us the uh fender liner over here or the uh i'm sorry not find the liner the trip piece over here
there's also one last screw over here that we forgot to put back into place
all right so last thing is going to be those uh 30 t30 torx bits right here right here
right here and right here
remember the bigger ones go on the
bottom smaller head ones go on top
All right guys, so that's how you install a 2017-2019 Honda CRV
rear bumper end cap. If you guys like this video, go ahead and like, and subscribe, turn on push
notification, and also get all your pre-painted auto body parts at ReveMoto.com. Thank you