Hello, assalamualaikum warahmatullah barakatuh, see you again with Black Builder ID achieved on
the reference channel for do-it-yourself Ok in this video, I want to be a little bit true
about the application of enamel paint Hi and I combined it with the basic jam, which is white and
the place that I tried yesterday yesterday The practice of these two media is the result, how do I use it,
I use a durable white dance and I coat the top with popcorn. Then for the
other medium, it doesn't have a white out, but I gave it a shop
. regarding the
Pineapple pen Previously I applied both types of media, namely iron like this
without putty and without art figures. Then for the wooden one, it's like this one without
white outs and without topcort. Eh Valentine is just equally good and he displays
bright colors especially if we give stockport gloss, so the impression is him more shiny, yes.
What I can say in this video is that I did a little experiment with the use of fertilizer, I
hoped and coated it with the shop. For the media that I use a white mouth, the procedure is not the
same as when we apply biocolours, how do we use Aunty water
, then primer and then plain abio and toko.atk, but in this experiment I only used putty
and then it was immediately coated with channel paint. The last one is pop for medical ones
like this and finally from wood it's straight to Alps and lastly, this is of course the process of applying
60 pens to the iron and wood media. I made it in a separate video, I happened to be able to see the
link above, which appears here, please see for the tutorial on the application and
here after this I will show you how the process of applying
enamel paint to wood is done and we combine it with white and tobot. here's the way, oh
my goodness, hi, it's effective for preparation for r emedy, I think we will grind it first
with the Sanders machine, here we use sandpaper for great 120.
After that, we clean the remaining dust from the dregs with a clean cloth.
Hi Jaan, for the application of the white mood, we can do it with the composition of white sea
and water, two to one if we use a mask or a blunt knife, if
we use the verdict of appeal S1 and if we use Air Spray, bro, it's
also one to one, so pay attention to what tools we use and
we match the composition according to the tools we need Okay and then even for
the application, it can actually be more than once and if it feels like once it's still
not enough OK, we can re-apply it to seem to produce the results we
want. The application makes white here. I didn't use water thinner so I immediately went
white without water and to use the tools used are script knife or palette knife and
don't forget Before we use the white wood we stir it first until it's thick and after that we
fill it or spread it all over the wood surface and for the experiment here I used
white out only in one example and I didn't use the other one with white and both of them,
I brushed an Orchid 60 pen and we'll see how the difference is at the end of this experiment,
after the white Hut has spread all over the wood surface, we wait for it to dry for about
20-30 minutes and when it's dry we check the dryness level with a touch of the hand.
After that we will continue to apply Orchid enamel paint and before we apply it
We have to do what plus with the whiteness using grade 240 for sanding we
do it until the composition is smooth and even we can use several methods, yes like that
the composition is 2 to 1B we use to be more it's watery, then when we use
a k brush because I used phosphor earlier, I used one for the comparison. Maybe. What's the difference
when I use a roll brush, I compare it to being charged, so it's even tighter hehehe
Hey lame huh, before applying Orchid enamel paint, don't forget the rest of the sandpaper, we
clean it first with a clean cotton cloth and for the ratio I use the water with 60 pens in a ratio of
4 to 1 because the application here I still use a phone brush and after
that we mix the enamel paint with the water until it is homogeneous and ready for us to brush it all over
the wood surface and in practice this time for the first wood. I'm satisfied with using white with it
, and I also emptied the wooden basket that didn't use white.
Hi after Orchid, the name of the paint is spread evenly over the wood surface. After that, we wait for
it to dry for about 20-30 minutes .
or not. And when it's dry, we sand it down ang
by using grade 4 hundred sandpaper the threshold sanding function that we did on the
previous paint layer so that for the next paint layer it sticks perfectly by doing
this threshold sandpaper we will make the chat look better
Hi for the application of Orchid enamel paint here I am do it three times Where we
can see a little difference between the example using the white Hut and without the white out
we can see there for those who use the white Hut maybe there is still a little visible
for the putty layer and this later after the Orchid enamel paint process it will be disguised
or it doesn't even appear at all and we can see the results are completely intact later
after this experiment. The position is two to one with water, you can use a brush and VGA
to apply this character, yes, it still has pluses and minuses and
we can do that for the application. more than once so as long as the main application process is not
in accordance with what we want, we can reduce the repentance application up to two or three
times and I think for three times the application of the Orchid 60 pen is enough. Next we
will do the final layer, namely topcort here. gloss so that later it will produce
a more shiny appearance even though we actually know that even though the Alpine-planted Orchid also
has a blouse appearance, even if we don't add topcort, but with the addition of
topcort, the result will be even more shiny and before applying topcort we
have to do a great dregs 400 against the previous Orchid 60 pen layer and
we clean from the remnants of the sandpaper and we settle. Hi chord blouse to the entire
wood surface and for the comparison between topcort and water, I used
a two-to-one ratio because I did use a brush. even for the application a
tutorial on how to apply using it, in terms of actual results, it depends on
each person's taste. After all, the technique remains that he still displays the main color
like this, showing the appearance according to the angkot, for example the blouse is more shiny and
David is more likely to be dim and it gives an elegant impression and for the other one
Hi and the difference between no white outs and knees maybe it's for wood if
we don't grind it to the maximum It looks like this still leaves or it still looks like
uneven wood fibers. In my opinion, that's why
you should make sure to apply enamel paint for the wood that is facing us, finishing with the Enno pen
is flat and smooth so that the coloring results become even more perfect, so for a
short video from me, hopefully it will be useful, sorry if there are errors in the
application of this nlpn application, I hope it helps, don't forget to subscribe like and share are and
life if Chandra doesn't stay with our next video, see you at