Hi everyone, welcome to HowFixit. In this video guide, I'll show you how to
replace the camera on the DJI Mavic 3 drone. Also, You can find links to step-by-step video
instructions for repairing other drone models in the description.
To disassemble Mavic 3 drone you'll need the following tools:
Screwdriver set with Phillips 1 and Torx T5 screwdriver
Plastic pry tools
Tweezers Glue gun
The drone is a complex device that has many screws and parts.
In the process of disassembling your Mavic 3 drone, I recommend keeping track of each
screw and part step by step, this will help to reassemble your Mavic 3 drone successfully.
And don't worry about losing any of the screws, all of them will definitely remain
on the magnetic mat. In the description, I left links where to buy all the necessary tools.
Before you start, remove the battery.
Be careful with the thermal compound, it will be reused when reassembling the drone.
Carefully disconnect the cable from the camera module.
Some ribbon cable connectors are additionally fixed with silicone glue.
First, remove this glue, then you can safely disconnect the cable.
In the description, I left a link where to buy a camera module for your DJI Mavic 3 drone.
After replacing the camera module, you may need to calibrate gimbal camera,
but this cannot be done using the DJI mobile app, you will need to use additional software.
How to calibrate the camera gimbal - I left a link to this video tutorial in the description.
Let's start reassembling the camera gimbal.
You need this thermal compound to install the camera module.
If you do not have this paste, take it from the old gimbal.
Now use a glue gun to fix the previously disconnected ribbon cables and wires.
The drone is assembled, and now you can check it.
I really appreciate you watching my video guides, you can ask all additional questions
regarding the repair in the comments. Thanks for watching and have a safe flight.