ok youtube want to replace my infrared remote here with a new wireless this is a little
wireless remote that I just got today let seal unplug the power was hoping I would have this
before installed everything but there's the infrared remote so this one's a lot smaller
you can see carrying the to this is the infrared this is the RF one peak output four amps there's
your installation notes operating instructions yeah common so that little red triangle is the
mark you want to use and that's over there that side that side go ok that must be the automatic
mode so you got all these various color changing modes 1920 static colors ok let's see if we can
find a good color so there we got kind of a yellow the greenish tint so if i turn it off ok it does
come back to the same whatever color you have sad that's good and then you have brightness so
you can dim it down let's see if it remembers the dim yeah remembers the dim setting good
evening youtube so i just wanted to check out my 3d printer remote lights with the RF remote
control here so i'm running a print it's dark up where my printer is but i can just hit the
button on the remote here boom i have lights i can see what's going on make sure the print
still running and i can just hit the button and they turn off little remote control works perfect
take a peek see what's going on turn it off and let it keep printing that way don't have to be
running lights all night so that works really well that's exactly what I was hoping for us so that's
the RF remote controlled it's an RGB light strips if I turn it on I can actually go to you can see
I can get the wild crazy mode but I can pick a color I think that's the color I was working
with sort of a natural white color and I can turn off the light so yeah that's working really well
that's a pretty nice option combined with the webcam and I don't have to pull down the attic
stairs or climb up there to take a look I can just have it running on my computer screen turn on the
light take a look and if everything looks good i turn it off and go back and do something else
because this print will be running probably another 12 hours or so no I don't want to be
having a light on the whole time it's bad enough having the printer running but at least it's doing
something but if i left the regular light on it would be burning power all night when i really
don't need to the other thing you can notice here is the temperatures are pretty stable that red is
the extruder temperature I have it set to 2 30 and it's jumping around a couple of degrees and
then the bed temperature is set to 1 tan and it's just moving around just a couple degrees there's
10 9.51 10.2 and see their one 11.9 it was up to 112 that's about the maximum range so it's about
two degrees above and maybe one degree below the set point so that stays pretty constant so I just
wanted to show you that running at night where you can actually see the advantage of having those
lights I can turn them on make sure everything's still going ok and then turn them off when I'm
done if you have any questions about that post up in the comment section below down here to obscure
I'd to the channel if you like that video and want to see some more and as always thanks for watching