Hey everyone it's Dylan and Charlie from the black forest wood company
this week we're going to be installing a door we're mostly just showing the install this week
it's actually a little bit of a different colour than we've done in a door in a long time
this client requested a solid gray door we're using ash which is probably our favourite wood
to make doors from so you guys are going to get to see that full install process this was a local
door here in Calgary and obviously a lot of work goes into these doors so we really appreciate all
the support that you guys can show to us even just leaving a comment and letting us know what
you think even if you don't like it you know we want to hear that too but thank you for everyone
who always chooses to tune into our youtube channel and I hope you guys enjoy this door
don't jiggle my thing
that hurt
I got you being short on film oh no I'm so tall I'm a tall boy my mom says
how tall's your mom? Shorter than me yeah exactly
my mom thinks I'm cool
we just put on the side for now yes just in case so we're ready to drop we just want that guy here
like I said we might have to cut right down in these corners here somewhere
oh we'll see if it pulls or whatever it does yeah but everything else is broken loose
so this one, to get it out of the door we kind of go back or turn it sideways
and then bring the bottom out like that yeah
all right, can we lift and move it back careful the light
easy
everybody good okay down she goes let's get the door over
what am I? An inch short?
uhhhhh
stretch it Spence!!
I'm multi-talented. Now she's not going to rot. Saved the whole house.
It looks butlyful
woodworking jokes
looks butlyful.
The shim process is part of placing the door, right
and it's the hardest part so what we got here is the threshold actually shoots up like this
so look at the way I've had to put my shim in right I've had to even to get the shim level
other words it's tilting way too far back so that's pretty close for a shim yeah that's good
so that's good I think ben what do you think we should do it from the outside right
it might be too difficult to stand it up like on an angle maybe we should just go straight through
straight through so then we should have put the top
first that was the thing right we can set it down now and just tip it towards there is that
right we still want or do we want to take it in as far as we can and then just stand the thing up
right now I think if we tip it over now it will be fine okay
so hold it cause someone go down with spencer on the bottom it's too heavy okay go back
okay we're gonna go in straight guys parallel
okay keep everything level and straight it's come keep coming
watch your fingers okay let's hold it in here
because if you go loose with the shim then it just it'll actually pull the unit over right
so i always well you gotta guess your shim thickness to start all right so we're gonna
bring the top in first right okay come to the end here jack if you can give it a round
let's have to go off on the edge a bit man yeah good
okay, let me pivot it.
cutting these little plugs for what we just screwed into the side, covers up our holes real nice
the colour matched really good
oh that one looks like it's not even there like it lines up with the grain so good
just finished the install the only thing is these, our little sidelights here our
hardware didn't come in time so we don't have little latches just yet and we are waiting for our
screens as well so there's going to be a screen that goes in front of there and then she's done
so i know we're probably going to get asked as well about the price on this door
it was a $26K door unit a big part of that is because it is an archtop
unit so there's a lot of extra work that goes into that we have to do the
laminated archtop that's all in different plies so that that's a lot of extra work
uh and then obviously the install's included in that price too uh but again let us know what
you guys thought about the door and if we were entertaining enough to earn your subscription
then please subscribe below and we will see you guys next week with these final words from charlie
it appears charlie left some little treats for us huh.