Hi everyone, Welcome back to geardo,
Today we will show you how to replace the LCD Screen Display on the Motorola
Moto One 5G Ace mobile phone. To start, we need to have the
right tools to proceed with the repair, which You can find in the description.
First, turn off the phone, take out the sim tray, and follows with the back cover removal.
To remove the back cover, it needs to heat gently
around the back cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on
the heating pad and Select the mobile phone HEATING option and leave it till
it completes. Alternatively, you can use a heat gun or hairdryer.
Next, create an opening using a suction cup and then insert a plastic card pry
tool or something similar to cut the adhesive around the back cover.
Next, using a heat gun, apply heat to soften the glue on the fingerprint button.
Next, Hold the touch id button and pull out the back cover from the body.
Next, Take out the board frame by undoing ten screws. Be gentle with the fingerprint button.
Next, disconnect the battery plug by raising the graphite tape.
Next, apply heat to pull out the battery from the body.
Next, release the black tape on the bottom of the battery.
Next, gently using a pry tool, cut the adhesive under the battery.
Next, pull out the battery from the body.
Next, disconnect the LCD plug, main plug, and two antenna heads.
Next, release the front and rear cameras from the bracket and then eject the sim tray.
Next, undo two screws to pull out the logic board.
Next, apply heat and pull the earpiece.
Next, take out the speaker cover by undoing six screws.
Next, undo the screw on the charging port board
and then pry the main ribbon and two antennas from the body.
Next, gently pull out the charging & headphone board.
Next, pull out the vibrator motor by applying heat.
The only remaining part is the broken front screen assembly with the frame & Buttons.
For the replacement, there are two different screen types available. The one is with the frame,
and the other is without the frame. It can be original, used, or aftermarket.
Either version you choose, you can get with the frame and without. But the most
straightforward repair will be with the frame, and also, the price difference is not that big.
I recommend you go with a screen with the frame installed. It can be original,
refurbished, used, or aftermarket. And this type is commonly available to purchase.
Next, on the new screen frame, start placing removed parts.
First, place and secure the logic board on the frame. Ensure the placement of cameras.
Next, secure the sim tray and two screws on the board.
Next, secure the lcd plug and place the earpiece speaker.
Next, place the vibrator motor.
Next, place the charging port board and secure the screw,
Next, gently place the main flex and connects to the main board.
Next, secure the antenna placement and connect both heads to the board.
Next, place the speaker cover by adding six screws.
Next, place the battery with adhesive.
Next, secure the tape to the battery and connect the battery plug.
Next, place the board frame by adding ten screws.
Ensure the fingerprint button has secured on the frame.
Next, Before closing the device,
it is good practise to verify the functionality by powering up the device.
Next, Before installing the main back cover, make sure it has enough glue.
If not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions; please like, share, and comment on our videos.
DO not forget to hit the subscribe button.