guys after we set all the decking now is the time to jump on top of it to start marking all
the slab edges balconies fire collars check the connection with the core and make sure
all information is passed to the workforce so let's go so guys first of all at this point we
need all the information now into our controller into our total station if we use a robotic that
gonna be obviously the CAD or DXF drawing now into robotics so we can tap the lines we can
set everything stakeout from it use everything we want and how to take that information in your EDM
you can check on one of my video when i'm showing you how to do it how to take the drawings into EDM
you're gonna be able to set out from it and the most important thing guys at this point
all information we need to be clarified all the information needs to be confirmed and let's have
a look at the drawing guys position of all these fire collars now have to be clarified you can
have a look actually on one of my videos when i was refining this you can have a look where
to ask the question but at this point all these have to be clarified your senior engineer should
provide you with this information before and it's really a little bit too late to ask this question
so make sure you got all this before we actually be jumping on top and if you're using a TS06 guys
i really recommend you to use a local grid to create a local grid you can have a look as well
on one of my video when i'm showing you how to do it and you should at this point as well you
have the old points now into your instrument so either you type them in or you copy them in
using the usb but you want this ready by now so having your information in the EDM is a one thing
but i want you at this point guys to have a folder with all the drawings here let's have a look at
what i got here i got the sections here and the details obviously as i told you last time the ga
drawing gonna be our starter for it so we got all the information what drawing number what section
number we're gonna be using we're gonna be looking for and then we're gonna be taking our information
so EDM with all setting out information inside and the folder with all the drawings so you can
have a look at the drawing and just to make sure you're doing the right thing so guys now is the
time to actually take our EDM on top and set it but before we do it guys i want you to actually
on the way to do that i want you to check all these connections here with a core make sure
all kwikastrips are in and if anything is missing here guys now is the time to flag it up and make
sure everything's going to be rectified we are working as a team guys we helping each other
but you cannot have 100 trust in your sleep form engineer and especially everyone makes the mistake
so that's our role guys now to pick up this stuff so if there are any contibars missing guys we want
to make sure we're going to drill it properly and for instance in position like here there might be
some couplers needed so you want to make sure they're not missing here uh maybe here as well
there might be bigger bars so if they're going to be 20 25 mm bar guys that's gonna be problem now
each time you're gonna be guys going for your break for you when you're gonna be coming back
just have a quick look the concrete guys gonna be actually first to be there they're gonna be
opening the quickest trip and preparing everything for the fixers to jump in so guys now is the time
to actually set our EDM there on top and how we're gonna do it so we're gonna use a column for it and
i'm gonna tell you a little bit more about it in the last video when i'm gonna be talking more
about the columns but in the columns on top we should install the pipe which later we're gonna
use to insert our monopod there and and chip is probably gonna install them as well for the
hangman when they're gonna be doing that decking but we wanna make sure they're actually gonna
use it there is a company called Survipod and i'm gonna leave the link below so you can have a look
at the product so even if you miss that pipe there they got they got bolt fixed solution for it so
you can still set your EDM on it so that's great it's a good idea but obviously guys at this point
we need all this stuff on site already we cannot just order it now so we need to think about it
before how we're going to set up and where we're going to set up what targets we're going to use
so we assuming now we got the targets all around let's go back to that drawing there let's assume
we're gonna be using actually this column just to set our EDM so from here we're gonna do all
our setting now so guys once our EDM is set there on top we wanna make sure our error is minimal as
always and now we're gonna be starting setting out i want you to start off what i'm going to call the
soffit items so let's have a look here on some sides we're going to actually find the hull fans
running on the soffit so i would actually start from here if you got any items like that running
through the soffit that would be first to go guys when the fixer is going to go and start installing
the bottom mesh that's going to be big problem later as they're going to be blaming us for it
sometimes on some sites uh there's a plates there as well look at this photo guys uh it's crazy look
at the number of the plates here it's crazy you can have a look at there's actually the served
monopod as well they're using that so look how crazy it is guys that's the first things to go
always the soffit items obviously i intentionally pick up the different drawing to the last one here
so we got the downstand beam here guys 755 deep and if your columns are actually spot on you can
actually measure off the column so the chippies can use the columns but i would definitely check
it later when we set up with the EDM look at this balcony here that's the lower level balcony
but this point guys that area should be already lower now and the decking should be ready there
with that 150 step and if you're looking on the other side here we got a bulk on it there with the
tv which is a thermal break so that would be our start guys there as well to mark this balcony so
the guys can start installing the thermal break and then if you can have a look here as well
that's dumpster beam here so they're gonna be same store as on the other side and we got the sections
here so we got section number 35 from drawing number 108 and i'm going to show you that in a
minute so at this point guys obviously we're going to be marking all the boxes all the penetrations
all the services here now there's all items going into software so we're going to install
them actually before the fixer is going to jump there and if you come back here next to the car
obviously we checking the car all the time but we got a balcony stops here as well that's a section
18 on droid number 108 i'm going to show you that in a minute that would be another one to
mark now they might be actually coming after the bottom mesh but you want to mark it now going to
make sure your lines are running here so they're not going to be any confusion later when they're
going to start installing the stubs so i'm going to go now to have a look at the sections
so we got section 16 here uh we got section 35 so you can see that dash line around the
building that typically means they're going to be some halfens coming into the slab edge but
but i'm going to say a little bit more about this in the next video when i'm going to be
doing actually the checks the pre-pull check and we're going to be checking when the chip is going
to be actually installing the slabs here we're going to have a look if they installed all the
hull fans there so i'm going to go now to the sections i'm going to start from number 11 here
which is a balcony now with a step in the soffit i'm going to show you the number 12 as well which
is the balcony now with the thermal brake with no step there that's the two sections here as you can
see that's number 11 here so that's the step in the soffit and that's the step on top here with
a small 50 millimeters upstand there so that's why i want you to have all these drawings with
you so you can have a look you're going to see how it meant to look i'm going to section 12 to
the other balcony here you can see the clearly marked it should be 80 mil thermal break there
will be another drawing actually issued from these guys here when they're going to show you which
item to use in the particular balcony and all the calculations there as well so we actually want to
use that one but as i said i'm gonna cover that in the next video when we're gonna be actually
checking if all the items are in and everything is in position so i'm gonna go back to that ga we're
gonna have a look how that downstand beam looks here and we're gonna have a look what that dust
line actually looks so that's gonna be section 35 on drawing 108 i got the drawing 108 here and
the section 35 is this one here so that's our down stand beam here guys and you can see here
that's our half and they call it half and but it says ancon channel so 30 20 you got a type of the
channel here continues all the way through that step and this is going to be installed there on
that shutter when the chip is going to be closing so as i said in the next video we're going to have
a closer look at it obviously guys we want to confirm the height of it we want to make sure
everything is installed and it should be but i'm gonna be here on the architects drawing elevation
drawing so guys i think that would be all in terms of marking the slab here the very first thing
we're gonna be doing the checking the core marking all the soffit items the cast-ins and what i also
recommend you guys once your edm is there you can just spot check your slab so that's the soffit
you've got there so you want to just spot check you want to make sure the level is good so that'll
be like a double check in your level and at this point guys while we're doing all this just don't
forget to keep checking keep checking look at the drawings provide the information to the guys as
this is our role to little babysit there as well so guys i think that would be all in today's video
we got all the information now with it in the edm we know how to set it now on top on the decking we
know what to start with what we're going to start marking and what we need to have a look as well we
got all drawings with the old sections all details so all the time we can refer to them and make sure
we do the right thing all the time and in the next video guys we're going to have a look on all the
slabs we want to make sure all the castings all the slavage items are installed there and we're
going to have a look at the rebar drawing as well we're going to do all the pre-put and make sure
everything is ready to be poured so guys thank you again for watching don't forget to subscribe
to the channel turn the bell notification on and leave the thumbs up see you next time