Hey, guys.
John here with realtruck.com.
Today we are gonna show you how to install the Extang MaxSeal Tailgate Seal.
All right, so the first thing we wanna do is we wanna clean up the area where we are
going to be detaching our tailgate seal.
We are just gonna clean this off with the alcohol prep pad that comes with our MaxSeal.
We'll go all the way along the bottom here, because we will be attaching it down here
as well.
It's a good idea to make sure if this is actually clean and dry before you even do that.
And this just helps get off any extra residue that might have been left behind.
All right, and, you know, it's pretty dirty even though this has been cleaned.
So, the next thing we are gonna do then is we're gonna get our seal and we are gonna
start attaching that.
And so, what we're gonna do then is we're gonna start with our seal, we're gonna take
a little bit of the backing on the adhesive here and pull it back.
And then we are gonna put our seal right down against the bed of the truck with the tape,
the adhesive part right to the edge.
So that way when this tailgate closes up, it actually forms a good seal right here.
Put that down there, press that down and we're just gonna work our way along here, making
sure that we actually have the tape on the right spot.
Pull the tape out.
Press it down and then just keep working our way up to the top.
And once we get up here to the top, we wanna take either a razor blade or a pair of scissors
and cut it off even.
And, you know, just make a little mark on it.
Pull it out away from the truck so you don't scratch the truck.
Pull that the rest of the way out and there you go.
Now we'll go over, we'll do the other side and we'll attach it just the same what we
do this one.
All right, once we have the sides done, we're gonna go ahead and do the bottom.
And what we are gonna do with that is we are gonna push this right up against here like
so.
Then underneath the side one, so that's just flush with the bed.
We'll bring this down here.
Looks like on the side, you get a good place.
Hold the tape and press it down.
Just continue along the whole bed line like that.
Hold that in place.
Okay guys, there you have it.
That's how quick and easy it is to install the Extang MaxSeal Tailgate Seal onto your
truck.
So remember, until next time.
Happy motoring.