How to Do Reverse Applique
You will need:
Main Fabric
Template
Double sided interfacing
Backing fabric
Here are 3 methods you can use
Raw edges, folded edges, knit fabric
Method #1 - Raw Edges
Best for machine stitching
Press the double sided interfacing with the paper facing up on the wrong side of the main fabric.
On the interfacing paper, trace around the template
Cut out the shape.
Remove the paper from the interfacing.
Place the backing fabric in the center with the wrong side facing up.
Press.
Stitch around the main fabric with machine or by hand.
Stitched by machine with a zig-zag stitch.
Method #2 - Folded Edges
Best for hand stitching.
Cut double sided interfacing 1 inch (2.5cm) larger than the template.
Draw the template on the paper side of the interfacing.
Cut out the shape.
Press the glue side of the interfacing on the wrong side of the main fabric.
Mark on the main fabric 1/4 inch (6mm) from the cut edge.
Cut out along the inside marking
Clip around the curves and corners.
Still on the wrong side, press the seam allowance to the inside.
Remove the paper and place the backing fabric on top with the wrong side up.
Give a light press.
Flip the fabric over and make sure all edges are pressed under. Fix if necessary.
Stitch around the edges of the main fabric.
Here is a simple running stitch.
It is often easier if you use an embroidery hoop.
Here is reverse applique using a blanket stitch, backstitch and a running stitch.
If your backing fabric is larger than the interfacing you can trim the edges.
Method #3 - Knit Fabric
Best for knit fabrics that don't fray.
Place the backing fabric wrong side up on the wrong side of the main fabric.
Pin it in place on the right side of the main fabric.
Trace around the template with a chalk pencil or removable pen.
Stitch around your marking. I'm using backstitch.
Carefully separate the layers and cut the top main layer.
Trim away the center leaving around 1/4 inch (6mm) from the stitching.
Cut any excess at the back.
Thanks for watching