Hi, DIYers.
Joe here from Alarm Grid.
And today we're going to talk about how to properly test
a glass break detector.
Glass break detectors are kind of funny devices
in that you can't really test them unless you simulate
glass breaking somehow.
Now, you can simulate this by actually smashing glass.
That's not recommended.
They sell testing devices that create
the noise of glass smashing.
We've seen sometimes in a pinch, if you go online
and you find a YouTube clip of glass smashing,
you can emulate this in certain instances
if you're really desperate to test your detector.
But the recommended way to do it is
to purchase a real glass break detector
to provide this sound to the device
to make sure that it is working properly, because if you don't
use what's recommended, you can't be 100% sure that it's
actually going to work.
What we're going to show you today is the Honeywell FG701.
And we're going to use this to test our Honeywell 5853 glass
break detector.
One of the nice thing about Honeywell glass break detectors
is that they require two tones to trigger.
They require a low thud and a high crash.
And what that simulates is something hitting glass
and then the glass actually smashing.
The FG701 creates these two tones.
And there's a few steps that you have
to take to actually get it to work to trigger the glass break
detector.
We'll show you this right now.
You'll notice on the front of it, you have your speaker.
This is where the glass break noise is going to come out of.
And it's very loud, so don't hold it next to your ear
or near your face when you do this.
On the top, we have some switches and some buttons.
You notice that on the left-hand side,
we have Activate and Test.
We have a red button right in the middle.
And on the right-hand side, we have FLEX and MAN.
Using this button and these switches,
this will let us get the detector into the test mode
and then actually trigger the test.
What we're going to do today is we're
going to activate it in the test mode.
And then we're going to do in a flex test with this device.
How this works is we're actually going
to tap the window right here.
And that low thud is going to be heard by our FG701, which
is then going to create a loud, smashing glass
sound to trigger the detector.
The first thing that we have to do is test it, though.
And if you're doing this in a real environment,
you have your glass break set up somewhere.
And you're going to want to test this
within its detection range.
When you install your glass break detector,
there's different settings on different models
and different capture areas.
It'll look like a cone in the installation
manual of where it can actually detect smashing glass.
You're going to want to measure that and make sure
that wherever you're testing from is within that cone.
So because our glass break is right here
and the window's right here, I know
that this is going to be able to trigger this thing.
So to get the glass break into the testing mode
so it's listening for smashing glass,
I have to set this to Activate and then MAN.
So I have my FG701 where I want to test from.
And I've removed the cover from my glass break
so that you all can see this LED that's going to light up
when it goes into test mode.
Let's give it a shot.
[ZAP]
So in the tester itself, I have to change
some switches to actually trigger the glass break
detector.
On the right side-- or the left side,
I'm going to switch this switch over to Test.
And then on the right side, your right,
I'm going to switch this switch over to FLEX.
And now we're ready to go.
What this is going to do, I'm going to press the red button.
And then I'm going to tap the glass.
And this is going to make a loud glass smashing noise.
What we should see on the glass break detector
is the red LED illuminate, which tells us that the detector is
working properly.
So I press the red button.
I tap the glass.
[CRASH]
And you'll see that red LED is flashing
telling us that the detector is actually working.
If you can't see the red LED, it's just really dim.
Watch right here.
[CRASH]
And that's how you test your glass break detector.
This method is the recommended way and the way
to test these detectors, because glass break
is similar to smokes.
You don't know if they're working unless you actually
test them.
Putting them up there and pressing the test button
on them is great, as it shows that it's
communicating with the system.
And it can send a signal that you
need to do one of these functional tests
to make sure that it's actually working 100% if you
want that assurance.
And because it's a security system,
it's recommended to do so.
If you do have any questions, though,
about testing your glass break detectors,
other glass break detectors, or how to use FG701,
feel free to give us a call at 888-818-7728.
Send us an email to support@alarmgrid.com.
Or head to our website, www.alarmgrid.com.
If you did like the video, feel free to subscribe.
And if you want to be notified when we post future videos,
hit the Notification button below.
And we'll send you an update when we do so.
Thanks for watching, and have a great day.