Hi everyone, I'm Edward Munoz and today we'll make one design with a MaxiCup™ and a MaxiStick™.
First, we need to inflate ombre Orbz™ with a hand pump,
or, if it's easier for you, you can use the Premium FoilPro®.
Remember, put air in your Orbz™ until all the wrinkles disappear.
Now, with one piece of 260, we will roll down all the neck of our balloon, and now, tie two times, one and two.
I have a MaxiCup™ and a MaxiStick™.
I will tie the 260 onto my MaxiCup™. You can cut all the excess.
And now, you have an Orbz™ balloon with air in the MaxiCup™ and Stick. But, if you
want to add something else, we need to make two quads with 11 inch balloons.
The first quad, we will make with 8 pumps. Remember, one two three four five six seven eight.
We have the first balloon, now it's the second balloon.
When we have the two balloons, we need to tie together,
wrapping around two times, one two, and now, tie.
You have your first duplet. We need to make one more duplet. When you have the two duplets, you need to put
together on the middle, and now twist two times. We almost match, coral and coral.
The second quad will be four pumps, one two three four.
You have two quads. The first one, 8 pumps. The second one, 4 pumps.
You need to put the first one on the second one. Now, to tie together,
you need one neck of one balloon and just twist two times, one two, like that.
This will be the base of your design.
See, now you have a beautiful, air solution design.