Hi everyone, Welcome back to geardo,
Today we will show you how to replace the lcd screen
display on the google pixel 4 xl mobile phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone and follow the back cover removal.
For this, we are using a heating pad. Place the back cover side on
the heating pad and Select the mobile phone HEATING option and leave it till
it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
While removing the back cover, be gentle. The flash sensor plug connects with the back cover.
Next, take out the bracket by undoing four screws to undo the battery plug.
Next, take out the sensor bracket by undoing two screws.
Please note one screw is missing on our device.
And then disconnect the plug to release the back cover from the body.
Next, take out the battery from the body.
First, apply heat to soften the glue on the battery. For this, we are using a heat gun.
Once you feel the heating is enough, use a pry tool to cut the adhesive under the battery.
Next, take out the left bracket on the board by undoing three screws.
Next, take out the right upper bracket by undoing three screws.
Next, take out the front camera and sensor module by disconnecting four
connector plugs and the antenna head and undoing four screws.
Next, undo one more screw on the top left.
Next, take out the right center bracket by undoing four screws.
Next, unplug five connector plugs, the antenna head from the logic board.
Also, make sure to take out the sim tray.
Next, gently pull out the logic board from the body by moving cables aside.
Next, take out the earpiece module by undoing the screw.
Next, take out the button flex by undoing two screws.
Next, Take out the speaker module by undoing three screws.
Next, take out the charging port flex by disconnecting the taptic
engine & antenna plugs. Be gentle in this process.
Next, take out the antenna board by undoing two screws.
Next, pull out the taptic engine by applying heat.
The only remaining part is the broken front screen assembly with the frame.
There are a few different screen types are available for replacement. The most common
is the Original service pack screen, which comes with the frame and buttons. There is another type,
it is original but without the frame. But the repair is a bit difficult and time-consuming.
Also, there are refurbished, used, aftermarket screens with the frame and without.
Furthermore, the price difference between the frame and without is not that big.
I recommend you go with a screen with the frame & buttons installed. It can be original,
refurbished, used, or aftermarket. And this type is commonly available to purchase.
Next, on the new screen frame, start placing removed parts.
First, place the charging port flex on the body.
Next, place the antenna board on the body by securing the plug and two screws.
Next, place the taptic engine by connecting the plug.
Next, Place the speaker by adding three screws.
Next, place the button flex by securing two
screws. Ensure to fold the cable to put on the body.
Next, place the earpiece module by adding one screw.
Next, place the logic board in the body. Be gentle
in this process and move cables aside while securing the panel.
Next, secure the sim tray and left screw.
Next, secure six connector plugs and two antenna heads to the board.
Next, place the bracket by adding four screws.
Next, place the front camera module by securing three plugs and three screws.
Next, place the top-right bracket by adding three screws.
Next, place the shield by adding three screws.
Next, place the battery with adhesive.
Next, connect the back cover sensor flex to the board and place the bracket by adding two screws.
Once again, our device has one screw, but yours should have two.
Next, secure the battery plug and place the bracket by adding four screws.
Next, Before installing the main back cover, make sure it has enough
glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.