Hey guys, today i'm going to show you the tools that I use most of the time
If you like to inquire a tool that you don't see in this video, leave me a comment below
The first work stand I had is a folding stand
It lifts only the back wheel and it doesn't have a clamp
The new workstand I have now is much stronger
It lifts the whole bike off the ground and the clamp is fully adjustable
The three-way hex wrench is a handy tool, it features 4, 5 and 6 mm hex set
The ratchet with hex socket sets not only removes the nuts and bolts easily but is
compatible with bottom bracket tools so that you can loosen or tighten at very high torque
Different types of bottom bracket require different types of tool
Make sure to get the right tool for the right bottom bracket
To remove the crank
You need the crank puller
To remove and reinstall a cassette, you need the chain whip and lock ring removal tool
The chainring nut wrench hold the nut on the back to prevent it from moving
Do you need to shorten the chain?
Remove the chain links with the chain remover
Is the wheel off center?
Fix and adjust the tension with the truing stand and spoke wrench
Cutters and pliers
You need cutters to cut the cables and housing to size