Hi everyone. Mike from CCTV Camera Pros here.
Check out our new HDMI over powerline kit. The kit includes a
transmitter and a receiver and it basically lets you plug
the transmitter and receiver into a standard power outlet
at your home or office to transmit an HDMI video signal
over a power line to one, two, or three additional monitors. This diagram shows
how it works with one of our security camera DVRs.
Basically, the HDMI output of the DVR goes into the HDMI input of the
transmitter. And the transmitter also has a an HDMI loop output. So, you can have a
monitor connected right by where your DVR is. Okay, and then
this little green line that has the wireless signal coming out of it,
that's going to be used to repeat the IR remote control.
if you want to use that at the remote location
where the other TV display is. So. on the other end is the receiver, and
again the receiver is connected to a standard power outlet. The power
outlet of the transmitter and receiver need to be on the same circuit
breaker and it can't be more distant than 300
meters. So, on the same circuit breaker and a total of 300 meters of power wire
or less. So again, on the on the receiver side
the HDMI output is connected to a monitor
and the IR input is connected to an IR receiver so again i can use the
infrared remote control of my DVR from the tv at the receiving end of this
system. Okay, so here's what we're going to do:
I have one of the transmitters connected to one
of our Viewtron DVRs. You can see the live view displayed
up here behind me. The four camera grid view is what I have on by default.
I'm going to take one of the receivers and
hook it up in my office along with the infrared remote control receiver.
The IR remote control repeater is right here facing the IR input of the
DVR. So, we'll also test out - i'll take the remote control
with me of the DVR and I'll show you how I can control the
DVR from my office through the IR HDMI receiver.
OK guys. We're back in my office now and here is the
HDMI receiver. It's hooked up to this TV monitor in my office
and the IR receiver. I used some double-sided tape
and just temporarily mounted it right here on the front of the monitor.
And I brought the wireless remote control with me from the DVR.
And you can see the live display here of the four camera grid view
where we left the DVR on. I'm going to use the remote control
to just select a single camera view of channel one. And I can just switch
to channel two by pressing two and so on and so forth. So I could just
cycle through any of the single camera views that i want.
And you can see the video is is not perfect, let's be honest here.
It's not as good as a direct output but you could see it is quite
fluid and responsive. It's perfect for a security camera system.
I can switch back to the
multi-camera view by pressing the multi button on the remote.
So there there's a quick demo of using
the receiver in my office.
I hope this demo of our HDMI over power powerline kit was helpful. If you have any
questions on anything, feel free to email me. I can be reached
directly at mike@cctvcamerapros.net
And you can learn more about this product on our website.
There's more setup diagrams. I'll be posting this video, the entire spec
and user manual. You can get directly the product page
at www.cctvcamerapros.com/tr2
Thank you for watching!