Install the fan cable into the PS4 case and secure 2 screws
Install the panel with a radiator and securing 3 screws
Install the PlayStation 4 motherboard on the metal panel in the PS4 case.
Pay attention to the thermal pads that everyone would be in place.
Next, install the second metal plate on the PS4 motherboard. Also check the thermal pads.
Install the holder screwing the bolts evenly, a few turns on each side
Take a Torx T8 screwdriver and secure 12 screws.
Connect the wire from the fan to the motherboard.
Install the bottom plastic panel of the PlayStation 4 case
Fasten 2 screws.
Install the hard drive in the PS4 case and secure one screw.
Install the glossy top cover of the PS4.
Connect the optical drive power cable to the PS4 motherboard.
Connect the WiFi antenna to the PS4 motherboard.
Connect the blue-ray drive cable to the PlayStation 4 motherboard.
Connect the wire to the power supply and install the power supply in the PlayStation 4 case.
Take two long screws, install them in the power supply and secure with a PH0 or PH1 screwdriver.
Next, take the Torx T8 and secure 3 screws on the case of the PlayStation 4 power supply.
Install up the rear plastic cover of the PlayStation 4.
Fasten the Torx T8 screws on the rear end of the PS4 case.
Stick stickers
PS4 assembled!