Hi everyone, Welcome back to geardo,
Today we will show you how to replace the battery on the google pixel 5 mobile phone.
To start, we need the right tools to proceed with the repair, which You can find in the
description.
The first step is to remove the LCD screen from the front.
To remove the screen, it needs to heat gently around the screen edges until the pasted adhesive
becomes soft.
For this, we are using a heating pad.
Place the front screen side on the heating pad.
Select the mobile phone heating option and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once you feel the Heating is enough, use a suction cup to lift the screen a little and
insert a plastic card pry tool or something similar to cut the adhesive around the LCD
screen.
Be gentle in this process; the flex connector cable is on the left-hand side of the screen.
Always use the edge of the plastic card pry tool to avoid internal damages.
Next, Lift the screen gradually from the right-hand side to the left-hand side and keep it like
an open book.
Next, take out the connector bracket using
a tweezer.
Next, disconnect the lcd connector plug from the board.
Now you can free the screen from the body.
And Also, Always make sure to clean the frame edges.
Next, release the graphite tape.
Next, Disconnect the ten screws holding the lcd bracket.
Two screws with a shield are hidden on top of the charging port board.
Peel the tape and undo both screws and pull out
the bracket.
Next, gently pull out the board bracket from the body.
Next, disconnect the battery plug.
Next, extract both adhesives by pulling the tab.
Please note that some phones may have extra pulling tabs, and others may not.
It depends on previous repairs and techniques.
Next, gently using a pry tool, pull out the not working battery from the body.
Note that graphite tape comes along with the battery.
Some replacement parts come with it, and some do not.
But, You can always remove the tape from the old one and place it in the new battery.
Next, place the new battery with adhesive.
Next, connect the battery plug.
Next, secure the board bracket by adding ten screws.
Make sure to add the small shield when adding two screws on top of the charging port board.
Next, connect the screen for testing.
Once the testing has passed, take out the screen.
Next, Before securing the LCD Screen, ensure it has enough glue; for this, can use B7000
glue or a new double-sided LCD adhesive.
Here we are using b7000 glue.
Next, secure the lcd
connector and then the connector bracket.
Gently slide in the screen from the left and then to the right.
Slightly apply pressure on screen edges.
Finally, we are adding bonding clips to fasten the lcd screen.
Leave it for some time and remove it; if not, use some rubber bands to tighten the screen
to the body.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions.
Please, like, share, and comment on our videos.
Do not forget to hit the subscribe button.
Please support us in creating more repair guides for the community.