Hi everyone, welcome back to geardo.
Today, we will show you how to replace the front camera & earpiece on the New iPhone
SE 2022, also known as iPhone SE 3.
Before Starting, we need the right tools to proceed with the repair, which You can find
in the description.
First, Turn off the phone and undo two bottom screws using a Pentalobe Screwdriver.
Next, To take out the screen, first apply heat to soften the glue on the screen.
For this, we are using a heating pad.
Once the heating has done, use a suction cup or something similar to lift the front assembly.
Next, use a plastic card pry tool for separating and loosening rubber gaskets on the frame.
Carefully workaround on the edges, and Keep in mind, do not put too much force to lift
the screen, it might damage internal flex cables.
Next, Remove four screws, and take
out the Shield.
Next, on the top right, undo three screws, and remove the protector shield.
Take out both shields, and next, Undo the battery, touch, and LCD connectors.And then,
to Free the screen, disconnect the earpiece assembly connector from the board.
Next, undo three screws to take out the earpiece bracket.
Next, undo two screws to take out the earpiece unit.
Be gentle and move cables aside while pulling out the module.
Next, pull out the front camera flex by applying some heat.
Gently pry
the cable.
Next, place the new front camera assembly and earpiece unit on the screen.
Be gentle with the cable and ensure
the placement.
Next, place the bracket by adding four screws and secure the earpiece by adding two screws.
Next, add the pre-cut water seal adhesive into the frame.
Please note this tape will not completely protect the device against the liquid.
Next, clamp the screen to the body.
First, connect the front camera assembly plug and connect the lcd & touch and battery connectors.
Next, turn on the device for verification.
Next, secure the lcd bracket by adding four screws.
Next, secure the upper bracket by adding two screws.
Next, to clamp the screen.
Click in the top section first, then click the sides and the bottom simultaneously.
Just make sure to put pressure on the frame sides.
Next, secure two bottom screws.
A quick note, It is good to check the ear speaker and sensor
response by a test call.
Hope you have enjoyed the iPhone SE 3 2022 Repair guide.
Let us know if you have any queries; please like,