What do you think this time we are going to implement step number 0 of Olaplex in a chemical process
Hello, hello how about ztylers have been asking me if you can implement
step number 0 of Olaplex in a chemical process either in a bleaching, extraction color or color
cleaning and the answer is yes, if you can implement step number 0 of Olaplex
in your chemical processes, it is just a little different compared to step number
1 and well now we are going to see how to implement step number 0 During the chemical processes Bleaching
preparation We need bleaching
powder we are going to add 1 tablespoon we
also need 10 volume peroxide I am only going to add 2
tablespoons we mix everything super well and finally we add 1 tablespoon of water
Application more olaplex # 0
As you can see, I already clarified the growth the front strand I separated it so that it is not
confused with the back hair and before I start I'm going to moisten all the hair a little
with Olapl Former number 0 the hair does not have to be soaked it is simply something
light and now without rinsing the Olaplex number 0 we are going to start applying the mixture
and as always I will start from the back to the front taking sections more or less than 2
centimeters thick And I am only going to apply the mixture in the dark area I will do my best
not to touch the growth, the application will be as if we were making a shampoo
and when we finish applying the mixture,
let it rest for no more than 35 minutes rinse with enough water and shampoo
Preparation of the dye
if there is excess dye it does not matter do not throw it there we are going to prepare the following mixture for
this mixture I am going to use the 9.43 tone I am going to add 1/2 tube I am also going to add a
linear centimeter of I am also going to add a copper intensifier to this one I am only
going to add 2 linear centimeters we mix everything super well and I am going to add 20 volume peroxide
I am only going to add 5 0 milliliters we mix everything very well until it is integrated
Application of the dye
As you can see, take advantage and once I retouch the growth of the back, now we are going to
do the application on the length of the hair and as always I will start from the back forward, being
very careful not to touch the strand in front, you have to be taking thin sections
more or less from one centimeter to two centimeters thick if we touch the growth
where we apply the previous dye nothing happens, there is simply I have to sweep it so that a cut
is not seen since I finish applying the dye now I am going to let it rest for no more than 35 minutes
Result
As you can see, my hair remains quite even to the growth, I am not as punished
as on other occasions I wanted remove a little the dark from the length of the hair and then
apply fantasy dyes remember that this technique only works to remove a little that unwanted
pigment to have implemented After a 10-volume color cleaning with peroxide and apart from
having had the hair, step number 0 of Olaplex personally lightened light hair a lot,
which I had to lighten since I did not want it to be a discoloration but simply
remove a few shades simply do step number 0 during the chemical processes
especially in bleaching your hair will not resist the damage so aggressive that by
not using it itself it is not a change that you notice with the naked eye but it is something internal since the
hair will resist even more the discoloration process and well this would be all I hope
you liked it, do not forget to burst the I like button to share this video and follow me on
all my social networks since you find me as LIZZTYLE and see you the next video