spring-loaded from the bottom push up comes off the springs there. take the
mounting frame off pins in comes off just check to make sure they've been
trimmed off so they're not even the back of the system but obviously they will be
inner cover needs to come out you'll notice that these little lugs here that
actually fit on in there that's important to lock holds in for moving
around okay transmission block, we call this the
transmission block. it comes out comes out there's a holding down bracket at the
back. Comes out. this lifts up. fold that down. sometimes you might have to
take the inlet valve a little clip in here that pushes down. comes out. obviously
you got to turn the water off which is a little stopcock, blue knob
okay make sure when you put the new valve in Lube that so push it it just
pushes in okay this is the valve. it down to make sure it goes all the way
home half flush Lever which is the smaller
lever on the inside okay roll the down bracket to make sure sits in there that
holds it all week price then comes in yet which is large in pixie hooks back
up to your tap Molly hey man hey just make sure that's all nice and
straight and solid transmission block goes in time to make the glyphs it's a
man and what you got a check is these rods stay here you heard a click turn to
the right click Matt that's what locks I mean you'd see like these and move in
and out so you've got to make sure you turn to the right here in autumn click
for the adjustment okay make sure the rods have been trimmed so when you
in they've been fully actuator they don't hit the back of the system so you
get the full width to the bare of okay there's a lot getting just you can
actually just leave man walk all right in the cover must go eat city knives of
the grooves there
there's a little stands at the back and this got to the little horseshoe things
I've got to make sure that those little legs actually see in there that's not a
city proper okay yeah to me multi okay then we put this back on
these ones here you might have you might not have to adjust the rods in this one
it's just the valve you might have engine valve an adjustment water yeah
okay on the system turn them down wage which locks and against entire wall
they're weird blocks mr. Talman 18 what you need to do is fight screen wave from
the bottom as I said. locks in.