- [Narrator] On his quest to master econometrics,
Grasshopper Kamal has made great progress,
stretching his capabilities and outsmarting his foes.
Alas, today he's despondent,
for one challenge remains unmet.
Kamal cannot yet decode the scriptures of academic research --
journals like "The American Economic Review"
and "Econometrica."
These seemed to him to be inscribed in an obscure foreign tongue.
- [Kamal] Ugh, what the... ?
- [Narrator] These volumes are opaque to the novice, Kamal,
but can be deciphered with study.
Let us learn to read them together.
Let's dive into the West Point study,
published in the "Economics of Education Review."
This paper reports on a randomized evaluation
of student electronics use in Economics 101 classrooms.
First, a quick review of the research design.
- Okay.
- [Josh] Metrics masters teaching at West Point,
the military college that trains American Army officers
designed a randomized trial to answer this question.
These masters randomly assigned West Point cadets
into Economics classes operating under different rules.
Unlike most American colleges,
the West Point default is no electronics.
For purposes of this experiment, some students were left
in such traditional technology-free classes --
no laptops, no tablets and no phones!
[voice echoes]
This is the control group, or baseline case.
Another group was allowed to use electronics.
This is the treatment group, subject to a changed environment.
The treatment in this case is the unrestricted use
of laptops or tablets in class.
Every causal question has a clear outcome --
the variables we hope to influence defined in advance of the study.
The outcomes in the West Point electronics study
are final exam scores.
The study seeks to answer the following question:
What is the causal effect of classroom electronics on learning
as measured by exam scores?
- Economics journal articles usually begin with a table
of descriptive statistics,
giving key facts about the study sample.
- Oh my gosh, I remember this table -- so confusing!
- [Narrator] Columns 1 to 3 report mean, or average, characteristics.
These give a sense of who we're studying.
Let's start with column 1 which describes covariates
in the control group.
Covariates are characteristics of the control and treatment groups
measured before the experiment begins.
For example, we see the control group has an average age a bit over 20.
Many of these covariates are dummy variables.
A dummy variable can only have two values -- a zero or a one.
For example, student gender is captured by a dummy variable
that equals one for women and zero for men.
The mean of this variable is the proportion female.
We also see that the control group is 13% Hispanic
and 19% had prior military service.
The table notes are key.
Refer to these as you scan the table.
These notes explain what's shown in each column and panel.
The notes tell us, for example,
that standard deviations are reported in brackets.
Standard deviations tell us how spread out the data are.
For example, a standard deviation of 0.52 tells us that most
of the control group's GPAs fall between 2.35,
which is 0.52 below the mean GPA of 2.87,
and 3.39, which is 0.52 above 2.87.
A lower standard deviation would mean the GPAs
were more tightly clustered around the mean.
- [Kamal] Yeah, but they're missing for most of the variables.
- [Narrator] That's right.
Masters usually omit standard deviations for dummies
because the mean of this variable determines its standard deviation.
This study compares two treatment groups
with the control group.
The first was allowed free use of laptops and tablets.
The second treatment was more restrictive,
allowing only tablets placed flat on the desk.
The treatment groups look much like the control group.
This takes us to the next feature of this table, columns 4 through 6
use statistical tests to compare the characteristics
of the treatment and control group before the experiment.
In column 4, the two treatment groups are combined.
You can see that the difference in proportion female
between the treatment and control group is only 0.03.
The difference is not statistically significant --
it is the sort of difference we can easily put down
to chance results in our sample selection process.
- [Kamal] Hmm, how do we know that?
- [Narrator] Remember the rule of thumb?
Statistical estimates that exceed the standard error
by a multiple of 2 in absolute value
are usually said to be statistically significant.
The standard error is 0.03,
same as the difference in proportion female.
So the ratio of the latter to the former is only 1,
which, of course, is less than 2.
- [Kamal] Uh-huh! So none of the treatment/control differences
in the table are more than twice their standard errors.
- [Narrator] Correct.
The random division of students appears to have succeeded
in creating groups that are indeed comparable.
We can be confident, therefore,
that any later differences in classroom achievement
are the result of the experimental intervention
rather than a reflection of preexisting differences.
Ceteris paribus achieved!
- [Kamal] Cool. Wait, what about the bottom,
the numbers with the stars?
Those differences are a lot more than double the standard error.
- [Narrator] Good eye, Kamal!
The table has many numbers.
Those in Panel B are important too.
This panel measures the extent to which students in treatment
and control groups actually use computers in class.
The treatment here was to allow computer use.
The researchers must show
that students allowed to use computers
took advantage of the opportunity to do so.
If they didn't, then there's really no treatment.
Luckily, 81% of those in the first treatment group
used computers
compared with none in the control group.
And many in the second tablet treatment group
used computers as well.
These differences in computer use are large
and statistically significant.
We also get to see the sample size in each group.
- [Kamal] The stars are just like decoration?
- [Narrator] Some academic papers use stars to indicate differences
that are statistically significant.
This makes them jump out at you.
Here, three stars indicate that the result is statistically different
from zero with a p-value less than 1%.
In other words, there's less than a 1 in 100 chance
this result is purely a chance finding.
[applause]
Two stars indicate a 1 in 20 or 5% chance of a chance finding.
And one star denotes results we might see as often
as 10% of the time merely due to chance.
Today, stars are seen as a little old fashioned.
Some journals omit them.
- [Kamal] What about those last two columns?
- [Narrator] Unlike column 4, which combines
both treatment groups into one, these last two columns
look separately at treatment/control differences
for each treatment group.
This provides a more detailed analysis of balance.
Also, for now, you can ignore this row
which provides another test of significance.
Now we get to the article's punchline, table 4.
This table reports regression estimates
of the effects of electronics use on measures of student learning.
- [Kamal Why does the study report regression estimates?
See, that's why I was getting lost.
I thought one reason why we liked randomized trials
is that we use them to obtain causal effects
simply by comparing treatment and control groups.
Since these groups are balanced, no need to use regression.
- [Narrator] Well said, Kamal.
In practice, it's customary to report regression estimates
for two reasons.
First, evidence of balance notwithstanding,
an abundance of caution might lead the analyst
to allow for chance differences.
Second, regression estimates are likely to be more precise --
that is, they have lower standard errors
than the simple treatment control comparisons.
The dependent variable in this study
is the outcome of interest.
Since the question at hand
is how classroom electronics affect learning,
a good outcome is the Economics final exam score.
Each column reports results from a different regression model.
Models are distinguished by the control variables
or covariates they include besides treatment status.
Estimates with no covariates are simple comparisons
of treatment and control groups.
- [Kamal] I thought they just forgot to fill it out.
- [Narrator] Column 1 suggests electronics use
reduced final exam scores by 0.28 standard deviations.
In our last lesson,
Master Joshway explained that we use standard deviation units
because these units are easily compared across studies.
Column 2 reports results
from a model that adds demographic controls.
Here, we're comparing test scores but holding constant factors
such as age and sex.
Column 3 reports results from a model that adds GPA
to the list of covariates.
Column 4 adds ACT scores.
Analysts often report results this way,
starting with models that include few or no covariates
and then reporting estimates from models
that add more and more covariates as we move across columns.
Looking across columns, what do you notice?
- [Kamal] Well, the coefficient on using a computer is always
a pretty big negative number.
- [Narrator] That's right!
We can also see that the standard errors are small enough
to make these negative results statistically significant.
In other words, the primary takeaway from this experiment
is that electronics in the classroom reduce student learning.
- [Kamal] GPA and ACT scores are also significant.
Why is that?
- [Narrator] Good observation!
That's not surprising.
We expect these variables to predict college performance.
- [Kamal] Oh right, of course.
Kids who got better grades before
are more likely to get a better grade in this course.
- [Narrator] You'll also notice a lot of other information on this table.
Remaining panels in the table report effects of electronics use
on components of the final exam,
such as the multiple choice questions.
These results are mostly consistent with computer use effects
on overall scores.
- [Kamal] What about the rows not in English?
- [Narrator] These rows give additional statistical information.
R-squared is a measure of goodness of fit.
This isn't too important,
though some readers may want to know it.
Other rows report on alternative tests of statistical significance
that you can ignore for now.
- [Kamal] Oh my gosh, these tables aren't that hard!
Thank you so much.
- [Narrator] Next up is regression.
See you then!
♪ [music] ♪
You're on your way to mastering econometrics.
Make sure this video sticks
by taking a few quick practice questions.
Or, if you're ready, click for the next video.
You can also check out MRU's website for more courses,
teacher resources and more.