Touchscreen Menu
In this video we will show you the touchscreen menu
and parameter settings of DJI RS 3 Pro
On the home menu
you can find icons for auto tune
balance status
gimbal mode
and gimbal follow speed
On the top status bar
you can check camera connection status and battery level
Tap the icon for gimbal auto tune
On the auto tune page
three values respectively refer to motor stiffness of the tilt axis
roll axis
and pan axis
Stabilization modes include Normal and SuperSmooth
Normal stabilization can meet the needs of most shooting scenarios
SuperSmooth mode is suitable for moving scenarios like jogging
or shooting from a moving vehicle
Tap Auto Tune to start gimbal auto tune
You can also press and hold the M button and the trigger simultaneously to begin auto tune
You can also manually change the motor stiffness of the three axes
Tilt the gimbal right or left 15° to check the balance
If progress bars of all three axes are green
the balance is good
Yellow indicates that the gimbal’s balance is slightly off
Red indicates the gimbal is poorly balanced
The gimbal mode icon is on the bottom left of the touchscreen
In FPV mode
you can change to other modes
3D Roll 360
Portrait
or Custom on the touchscreen
Tap the follow speed icon on the bottom right
You can choose fast medium slow
or custom follow speed
Slide down from the top of the home menu to enter the control center
In the control center you will find
Tap the upper-left icon to lock the screen
to prevent accidental touches that affect operation
Slide up to unlock.
Tap the upper-left Bluetooth icon for Bluetooth connection
Tap Connect
and the gimbal will link with your camera via Bluetooth
Certain camera models like BMPCC require a linking password
After successful linking
the Bluetooth icon will turn blue
Tap the silent mode icon to turn off notification sounds
On the settings page
you will find from top to bottom
Disable Selfie
If disabled
Selfie mode will not be entered if the trigger is pressed three times
Orbit Follow
Once enabled when you shoot while circling a subject
the gimbal delivers smoother movement
Auto Lock
Choose whether to enable automated axis locks
and the corresponding actions when powering on or entering sleep mode
Push Mode
Enable to manually adjust the tilt and pan axes
Horizontal Calibration
When the gimbal’s leveling is slightly off
you can choose horizontal calibration or try manual fine-tuning
Focus Motor Endpoint
When using a focus motor for follow focus and focusing
you can calibrate the focus motor or manually set or disable the endpoints
Gimbal Auto Check
Tap to analyze and output hardware status information of the gimbal
Restore Parameters
Reset gimbal parameters and Bluetooth
Language
Supports twelve on-screen languages
including English
simplified Chinese
and traditional Chinese
Device Info
Displays information like device SN
device name
and password
Firmware Version
Check firmware versions of the stabilizer and the connected accessories
Slide up from the bottom of the home menu to enter the gimbal settings page
On the gimbal settings page you will find
Joystick Speed
You can set the joystick speed to fast medium slow
or even enter a custom value
Joystick Smoothness
You can set the joystick smoothness to high medium low
or enter a custom value
The higher the value the smoother the joystick
and the more slowly the gimbal stops after the joystick is released
Front Dial
Set the function of the front dial to control focus motor
focus/zoom
ISO
Aperture
shutter speed
roll axis
pan axis
or tilt axis
Front Dial Speed
Set the response speed of the front dial
Front Dial Smoothness
Set the smoothness of the front dial
Reverse Dial
To reverse the previous setting for the dial
M Button
Can be customized to lock/unlock the touchscreen
take a photo
or LiDAR AF/MF
Swipe from right to left to enter intelligent feature settings page.
Swipe from left to right to enter the video transmission page
When the gimbal is not connected to any video transmission device or LiDAR range finder
it will display No Video Input
When the gimbal is connected to the DJI Video Transmitter
you can achieve functions like remote monitoring
recording/playback
and motion control on the DJI High-Bright Remote Monitor
When connected to the Ronin Image Transmitter
you can check the camera view on the touchscreen and the Ronin app
and use functions like ActiveTrack and motion control
When connected to the LiDAR range finder
you can achieve use functions like autofocus and ActiveTrack Pro