Introducing the DJI RC Plus Remote Controller
Remote Controller System Interface
Power on the remote controller
and enter the home screen
The top bar displays the time
Wi-Fi signal
and battery level of the remote controller
At the bottom of the home screen
there are DJI Pilot 2 App
Gallery is used to view the stored photos or videos
File is to check stored files
and Firefox allows you to open the browser
Tap Settings to enter system settings
Tap Tips to read the detailed information on the remote
controller buttons and LEDs
Screen Gestures
You can control its features from this screen
and activate several outcomes with the simple three
gestures
Slide from the left or right to the
center of the screen
to return to the previous screen
Slide up from the bottom of the screen
to return to the home screen
Slide up from the bottom of the screen and
hold to access recently opened apps
Shortcut Settings
Slide down
from the top of the screen to enter Shortcut Settings
The interface is divided into two parts
Notifications are on the left
and Shortcuts Panel is on the right side
Notifications: Tap to view system notifications
Recent: Tap to view and switch to recently opened apps
Home: Tap to return to the home screen.
System Settings
Tap to access system settings
shortcuts
Tap to enable or disable Wi-Fi
Tap and hold to enter settings and connect to
or add a Wi-Fi network
Tap to enable or disable Bluetooth
Tap and hold to enter settings
and connect with nearby Bluetooth devices
Tap to enable DO NOT disturb mode
In this mode, system prompts will be disabled
Display Enhancement
Once enabled
the display brightness is enhanced to assist in shooting
However
there are differences between the
source and display effect
while the source
photo or video taken by the aircraft is not affected
Screen Recording
Tap to start screen recording
Screenshot: Tap to screenshot the screen
Mobile Data: Tap to turn mobile data on or off
Tap and hold to set mobile data
and diagnose network connection status
Airplane Mode
Wi-Fi, Bluetooth, and mobile data will be disabled
Adjust Brightness
Slide the bar to adjust the screen brightness
Tap the icon to enter auto-brightness mode
Slide the bar
or tap the icon to switch to manual brightness mode
Adjust Volume
Slide the bar to adjust the volume
tap the mute button
Tap to mute. Note that after muting
all sounds of the remote controller
will be completely disabled
including related alarm sounds
Please turn on mute with caution
HDMI Settings
When you need to share the camera view to a display
connect the HDMI port of the remote controller
to the display with the HDMI cable
and set the resolution in the app
Combination Buttons
Some frequently-used features can be activated
by using combination buttons
Here we will introduce how to use them
Back Button + Left Dial
Adjust Brightness
Back Button + Right Dial
Adjust Volume
Back Button + Record Button
Record Screen
Back Button + Shutter Button
Screenshot
Back Button + 5D Button
Toggle up to enter the homes screen
down to the Shortcut settings
left to access to recently opened apps
Compass Calibration
The compass may need to be calibrated
after the remote controller is used
in areas with electromagnetic interference
A warning prompt will appear if the compass requires calibration
Tap the warning prompt to start calibrating
Or follow the steps to calibrate the compass
Power on the remote controller
and enter the home screen
Enter Settings, tap Compass start calibrating the compass
Follow the on-screen instructions to calibrate the compass
4. A prompt will be displayed when the calibration
is successful