Hello everybody 'Lurgs' here welcome to my channel and today
how to clean the filter on your LAY-Z-SPA right let's get cracking well in a minute!
You can of course replace it with a brand new filter but why not save some money and clean it,
if your filter is dirty or blocked up you're likely to get an E02 error which basically
means that you're not getting enough water flow through the filter and into the heater system
so to rectify this we're going to remove the filter give it a good clean
and then put it back in again and the filter is inside this unit here
but before we remove that it's very very important to turn the LAY-Z-SPA off at the mains
so just switch off at the mains make sure you do that with dry fingers of course
so the power is definitely off now to remove the filter mechanism gently unscrew it anti-clockwise
just keep going
there we go so that is now removed and the filter is inside this housing
so let's just put this on a table
just going to flip it upside down you've just got this locking nut screw mechanism here
so unscrew that anti-clockwise remove that now flip it back over
and just remove this lid it literally just pulls away upwards it's quite tricky filming with one
hand and doing it with the other hand and there is the filter and you can see how dirty is compared
with a brand new one which is sitting next to it on the table but instead of replacing it with a
brand new one we're just going to give this one a bit of a clean now I'm just going to start with my
wife's toothbrush and just giving it a good clean with some hot soapy water just to get rid of any
grit and any dirt, [Wife calls] Have you been using my toothbrush to clean the LAY-Z-SPA now.
And there's a link above now about how to clean your uPVC window frames so they stay clean.
This is about as good as I'm going to get it using my wife's toothbrush,
what I'm going to do now is open up the Dishwasher if you've got a Dishwasher this is a brilliant tip
I'm just going to lay the LAY-Z-SPA filter in the top tray I'm going to make sure it
lines up with the spray jets on the upper arm here so the spray jets go directly up inside
put that upper tray back in load my Dishwasher tablet, close the Dishwasher and just set it on
a normal washing program of 65 degrees centigrade, obviously you won't be able to do this forever on
a filter it will just degrade over time but if it's fairly new this is a really good solution
for giving it a good clean and this is two hours later let's open up the Dishwasher
and that is looking absolutely fantastic okay it's not as good as a brand new filter
but that's looking really good to go straight back in the LAY-Z-SPA
right let's get it back in so just put it back into the filter unit housing
put the lid back on just push that down so it's nice and tight then take your locking screw nut
mechanism flip it back over and just screw this in clockwise until it's nice and tight
now that is ready to go back into the LAY-Z-SPA now make sure when you're screwing this in
clockwise it's on the bottom unit there that it goes on nice and easily if it doesn't feel like
it's going on easily stop and take it off and put it back on again it should be very very easy
and it should turn nice and simple you do not want to damage those threads because they're plastic
threads and if you damage them that is going to be a world of pain so that is now locked in
what we do now is go back inside turn it back onto the mains with your
dry hands push this switch to turn the LAY-Z-SPA on you get that red led light,
Daisy's ready I'm now back in the LAY-Z-SPA I'm just going to hold the on off switch
on just to turn it back on I'm going to put the heating on turn it up to 38 Centigrade
you can feel the hot water coming out of there already now it's time for bubbles oh yes bubbles
oh and a cup of tea bubbles of a cup of tea perfect there's someone else
who wants to get in the LAY-Z-SPA but they're not allowed because you'll probably burst it!
If you found that video useful please subscribe by pressing this button down here
if you don't want to miss more videos on how to save you time and money there's also some other
videos around the end of the screen any of those useful to you you can select those now. Lurgs