Hey guys, Aaron with PJ trailers, and today I want to talk to you about buggy haulers.
Behind me is a custom ordered B5 in powder coat grey, which you can also
order our higher load capacity versions in the B6 and B8 models. Now, the typical
trailer today has a deck width of 83" which is really too narrow for
your rock crawlers, 4x4s and bigger trucks. Now, the B5, it comes
standard with a 102" deck. This gives you the versatility to haul everything
from your UTVs and ATVs, to small tractors, to oversize jeeps and other
off-road vehicles. Now, the B5 has a GVWR of 9,900 lbs
which gives you a load carrying capacity of 7,000 lbs. You can order
the B5 in 16', 18', 20' or 22' versions. Now, the B5, B6 and B8 all come standard
with flush mount LED lighting in a sealed wiring harness. This creates added
safety by giving you greater visibility at night, as well as more reliability
than the traditionally used incandescent bulb. Now let's take a look at this trailer.
Starting up front we have a heavy-duty 2 5/16" coupler.
in an adjustable channel mount. The three different positions here give
you the ability to adjust the coupler height to the correct position to tow
the trailer down the road, level. The B5 features a beefy 5" channel
tongue and 3" channel cross members on 24" centers making this a
heavy duty buggy hauler. Here we can see our Bargeman 7-way plug. The 7-way plug
here features dual contacts, and Bargeman is known for their extreme reliability.
Inside our toolbox houses all of our hydraulics as well as our
deep cycle battery, and right upfront you can also see the 110 charging port.
Behind the toolbox we have a Super Winch TS 9500 and a tongue mounted winch plate.
This winch plate is very important because it allows you to pull all the
way up to the front of the trailer without running into the winch.
Behind the winch plate we have our PJ Exclusive 12,000 lbs hydraulic Monster Jack.
This jack allows you to easily lower and raise the trailer with a simple push of a button.
The Monster Jack is made of 5"x5" steel tubing for superior
performance and durability, and with the extra-large articulating
footplate, it will prevent it from sinking into the ground. The B5 features
both front and rear board caps. This allows us to run the lumber underneath
it to prevent it from curling as the lumber ages. The rub rails and stake
pockets on both sides do come standard on the B5, and as you can see, the decking
on this trailer features our PJ Exclusive Blackwood Pro and Max-Trac.
This considerably improves traction, allowing for easier loading and
unloading, especially during wet weather conditions. This also helps to improve
traction while walking on the trailer. Now let's take a look at our fenders and
our running gear. With a traditional trailer you are limited to the width of
the inside of your fenders. With these diamond plate steel drive-over fenders you
can take full advantage of the width your deck by simply driving over them.
Now, this trailer is sitting on dual 5,200 lbs Dexter axles. Dexter is known
as the industry standard when it comes to reliability and durability. Not only
that, they're easy to maintain with their EZ Lube system. For the tires we have
Radial 225/75/R15s on black spoke wheels. This is a great upgrade to
customize the look of your trailer, and not only that, these tires are gonna last
a lot longer than a traditional trailer tire and give you a better ride. Now
let's take a look at the back of the trailer.
This B5 was ordered with a 2' dovetail and 5' slide-in ramps.
The dovetail will help to give a lower load angle for your low clearance equipment
and cars, while these rear support jacks will give you more stability while
loading and unloading. As you can see, the B5 Buggy Hauler is a favorite in the
toy world, because of how versatile and heavy-duty it is.
You can go to pjtrailers.com to check out all of our trailers, as well as to find your closest
dealer to help customize and order your next PJ trailer. Thanks guys!