So basically this is Fortress Accents We have 5 different cap sizes, we have anywhere
from a 2 inch cap to a 5 inch cap.
The two and three inch caps they are iron post, or are aluminum post.
Then our 3 ½ inch, 4 inch and 5 inch The versions will fit some wood or some wood composite
posts.
We tried to come up with a cap design that fits most of the key players in the composite
that industry. So we have a well enough known company that we probably have a cap options
that going to fit.
As far as the finishes go, we've got whites black well the call our ABZ (Our antique bronze
finish). All the capture constructed out of die-cast aluminum they have uh...They come
as a 2 piece design. It's all hidden fasteners, you don't see any fasteners on our caps. And
they way that they go together is with our caps that are made up to fit a steel or aluminum
post you have set screws that actually lock the cap to the base to the post. On our versions
that fit onto a word or wood composite post. There are screws inside of it, there's 4 screws
inside that actually screw into the deck post. Or the wood surface onto of the wood post.
And what that does is by having 4 screws you can actually balance it or level it to get
a perfectly horizontal finish.
So our caps come unlit, there's no light kit added to them at this point in time.
iI the homeowner decides they want to add a light kit what they do is they buy what
we call a cap like it module and that module or kit consist of four LED's assemblies they
all have heatsync technology to draw the heat off of the LED's
it's uh...sends out a warm light out and then we have a lens that directs the light outwards,
so it's not a spotlight but is creates a wider spread on the lighting.
And what you do is these lights actually plug into these corresponding slots on the base
cover. Then what you can do is if you decide that you want a light 1, 2, 3 or 4 sides for
instance this one is lit on all four sides. This light is actually lit on 2 sides. You
have light on both of these and not a light here. So you have some flexibility as far
as were you. If you decide that you want to buy and have
one light in each of these you can actually take these pieces and cut them off and move
them from one cap to another to change the light effect that you get with your deck.
Then we have what we call our universal accent lights, these are small lights that are 2
½ inches long by 3 inches in depth and they mount up underneath the post or railings.
They mount underneath a stair tread. Again, it's all LED technology. This with the same
heatsync technology to draw the heat off of the LED. Also the lenses to direct the light
out into a wider spread.
The 3rd light that we have is a vertical post light. It mounts to the side of a post. Again
it's all hidden fasters. The LED's come out the bottom it's got the same lens that directs
the light out away from the post
Then our last light that we have is our surface mount light its die-cast aluminum also. What's
unique about that light as we have a specially designed lens that actually spreads light
across the surface so you don't get the hot spot that you can see with a lot of other
surface lights. It gives it a real nice effect basically of how the light is dispersed and
emitted from the fixture.