Hello.
Today I will show you how to make a grinding machine from a food processor.
A food processor is a kitchen appliance for grinding vegetables and fruits, similar to
this.
Due to its design, this kitchen appliance is very suitable for making a grinding machine
out of it.
I have such an old food processor, despite its venerable age, this device is still in
working order.
The first thing to do is to remove the bucket with the lid and turn on the safety switch.
Since there is now no cover, I need to make a strip of plastic that will be inserted into
the slot where the switch is located.
So, I inserted a strip in the slot of the switch and now the engine of the food processor
is started without a standard bucket.
Now I need to improve the tool for a food processor, which in the form of a circle.
I need to make a round pad of plywood and fix it on this circle.
Since there are holes on the circle, it is easy to fix the plywood on the circle.
I did this with four washers, screws
and nuts.
When I finished this work, I had to carve and paste the sandpaper.
As usual, I do this with Glue Moment.
So that my new machine will not stagger and vibrate during work, I decided to attach it
to the table.
Steel corners for this purpose are very suitable.
Now the machine stands very firmly and I can make the edges of the plywood just perfect
with the rasp.
It's time to test the machine.
Yeah, the machine works just perfectly, there's no vibration and the polished chisel looks
great.
Testing the edges of the plywood, too, does not cause any comments.
Everything works just fine.
To finish the video, I decided to bring the food processor to its original appearance.
As you can see, this is possible, the food processor has not received any damage.
On this I finish the story about the manufacture of a grinding machine from a food processor.
If you think this video is useful for your horizons, then rate this video and subscribe
to my channel.
Until the next video!