My name is Tony from KEB America I work in the elevator group. Today
we're going to show you how to use the Bluetooth elevator app.
This is the first-generation Bluetooth adapter. This is the next Generation Bluetooth adapter.
You can use either adapter to connect the F5 drive and the elevator app. If you have
the first generation Bluetooth adapter like this the password will be 123456.
Other than that, the process to connect to the app is the same. This is our Bluetooth adapter on the
back of every Bluetooth adapter there's a unique passcode. Write this down or save this somewhere.
Once you plug in the adapter to the drive it'll be difficult to see. Once you connect the adapter
to the app the app will recognize the adapter and you won't have to type in the password again.
To connect our Bluetooth dongle, for smaller ones you just hook it up to the keypad. For larger ones
like this one you have to remove the cover. To do so remove the two clips on the bottom and slide
the cover up from the top [Music] when you connect to the Bluetooth dongle you see the light turned
on and that's when you're ready to go to connect to the KB elevator app select the app icon
your Bluetooth devices will be here select on your Bluetooth adapter type in your passcode
select save pin and select ok
once you're connected and in it'll show you this connection screen all you have to
click is the button on the top left corner here and now you're on the dashboard of the KB app
the first screen is your home screen it'll show you a bunch of diagnostic screens very similar to
your home screen and your drive you also have your diagonal screen number one two and three and this
is just different parameters that you can use for Diagnostics you'll also show you your fault log
with all the faults on there and your inputs and outputs screen you can also go to parambers and
make any parameter changes you need right on your device for example if you want to go to motor data
change motor speed you go to edit mode and then you would type in whatever your value you want
as your RPM and click right value to save it and this will write it right to the drive
you can also make a parameter backup
which saves all the parameters on the drive right onto your device to do so you click create backup
you would name your title for it could be your job address job name car number click ok
and then it will start writing all the parameters to your Android or Apple device
after your download is complete it will show a backup completed on the screen you can click ok
to remove it from the screen and your backup is now created to disconnect from the drive
all you have to do is either remove the Bluetooth dongle or select in the top right corner elevator
drive and top right again put disconnect and now you're disconnected from the drive to disconnect
from the Bluetooth app and you just disconnect the dongle like so and put the cover back on
and then make for these large drives make sure that the two
bottom buttons click it and those are the basic steps of using our KV elevator app
[Music]