hey everybody welcome back to the channel I'm going to show you how to perform a recall on
this 2022 Escape 1.5 liter three-cylinder this is for the drain tube you install on the side of
the cylinder block you got to take the battery and the air box out let's get into it hello everybody
2022 this is an escape what do you believe recall 22 s 73 yeah this is an escape
you guys remember AJ how's it going he's with me at Ford now this is actually
installing this drain hose into the side of the engine block for the cracked injector thing so
AJ this is his first one I've done two of them this morning First Step pull the air box out
Next Step take the battery out
and it's going to be 10.
10 13. 10
got a couple little pop rivets on there
that's the battery monitoring sensor
you have to take that 13 off because that's part of this cable
these are actually pretty easy to do
I have a little popper of it right here
there we go and that comes over here and you got 10 and then another 10 down there
all right so what I do is once that's loose because you'll drop that thing
pick this thing up and balance the nut on there
there you go and then
so you got this off already right here on the side
you have to push that side in and then they pop out
if you push one side in and then you can get it right another side
because it's like one of those V Clips I got you I can get it
thank you
excuse
foreign
and then you have this one over here it's holding this coolant line in okay
pop all these tins left I'll just
dude
and you lift up on it foreign
push down on the tree
help you
all right push down on the tree
and out comes the tree
so the hole we're looking for
uh it's right back there
that little guy right there that little guy right there
foreign
you got to cut that one off trim that one break some junk on here and put some Loctite on it
use the primer for the Loctite
so this is going to sit in there it's going to run down snap into the rail frame rail
nasty stuff man it's like real
probably a bit too much
and then after we do this we have to reprogram the PCM
right for that hole
let it sit there for a minute
dry up a little
thank you
trim the other one no no not yet
no way down it's gonna go down there
and you see it hanging there and it's going to go into a hole and right there where the where my
fingers at AJ wants to go ahead and do that we'll show you what it looks like so it's seated in
batteries back in he's putting the air box in right now it just snaps in there
and then we'll have to reprogram the PCM
you have to make sure that's snap locked in it's got these little
thing
right up here okay and then these line up here one down there I did that last time
there in the lid and then pop ribbon pop right
and put the lid back on then we'll reprogram the PCM and then that'll be done
and that is the recall 22s 73 is that what I said it was drain tube
for the fuel injectors if they crack anyway I love you guys I'll see you on the next one