THIS VIDEO HAS NO AUDIO
[Unboxing and Setup of the HP PageWide Stapler/Stacker]
[Finisher (Z4L04A)]
[HP PageWide Enterprise Color Flow MFP 785z+]
[HP PageWide Managed Color MFP P77940dn+]
[HP PageWide Managed Color Flow MFP E77650z+]
[HP PageWide Managed Color Flow MFP E77660 z+]
Unpackage machine as shown. Set top part to the side.
Remove box as shown.
Lift machine onto its side as shown.
Remove protective foam and plastic wrap as shown.
Remove blue tape as shown.
Place pedal as shown.
Insert brackets as shown.
Insert screws as shown.
Insert tray as shown.
Place screws as shown.
Place tray as shown.
Extend tray and remove blue tape as shown.
Open cabinet door.
Remove screw as shown.
Turn roller as shown.
Insert part as shown.
Remove caution tape as shown.
Close panel door.
Connect power supply.
Connect cabinets as shown.
Note area indicated in red.
[Note: To align the finisher with the printer,]
[adjust the level of the two star wheels.]
Open cabinet door.
Scroll roller as shown.
[Note: If additional alignment is required,]
[adjust the level of the two hidden wheels]
Remove screw caps indicated in red.
Remove screws indicated in red.
Remove panel as shown.
Turn screws to adjust as shown.
Replace panel as shown.
Replace screws where indicated in red.
Replace screw caps where indicated in red.
Open paper tray as shown.
Adjust paper guides out.
Load paper as shown.
Close paper tray.
Note incorrect paper load.
[Caution: Use Letter/A4 paper in Tray 2 ]
[to initialize the printer.]
[The printer will not initialize correctly]
[with Tabloid/A3 paper loaded in Tray 2.]
Connect power supply.
[Find HP Online: hp.com/SupportVideos]
[hp.com/SupportForum YouTube@HPPrinterSupport]
[Facebook@HPSupport Twitter@HPSupport]
[HP]