Hi, DIYers.
This is Michael, from Alarm Grid.
And today, I'm going to be showing you
how to add, or repair, or enroll,
whatever you want to call it, a Z-Wave
lock to your Honeywell Home PROA7PLUS security system.
The PROA7PLUS has a PROWIFIZW card inside, which
is a Z-Wave plus controller.
You will also find it in the Resideo PROA7PLUSC.
But if you have a Honeywell Home PROA7 or Resideo PROA7C,
then you would need to add that module to the system
before you would be able to add Z-Wave devices, including
Z-Wave locks.
We have a Z-Wave lock here, and we're
going to be enrolling it with the system.
I'll show you a little bit of the functionality.
And I'll also, show you how you can set up a user code to push
down a code to the lock.
So lots to cover today.
So let's get right into it.
We're at the main screen of our PROA7PLUS or other ProSeries
alarm panel.
We can click the three horizontal bars
at the bottom, which is devices, Z Wave management.
And we do need a code to get in.
We can use our master code, which ours
is at the default, 1, 2, 3, 4.
Usually change that code.
I'm going to also try to install our code default, 4, 1, 1, 2.
And so we've got the Z-Wave management menu.
So the first thing we're going to do,
we're going to go to Exclusion Mode
because we're going to clear this device from the network
first.
Even if it's not paired with a network,
it might have some Resideo Z-Wave network
data stored inside of it, and clearing it
from the network and best practice,
and it will ensure that it can pair with a network
successfully.
If you don't know how to activate
the Inclusion, Exclusion function on your lock,
refer to the manual of your lock.
Ours just has a nice button on it
that we can press for that purpose.
But we're going to use Exclusion Mode
and now it's listening for a device
to clear from the network.
We can press this button on the lock which is
the inclusion/exclusion button.
And you see that we have one device excluded.
And now we got it done.
And then we're going to go to inclusion mode,
and we're going to do the same thing.
We're going to press this button.
And we're going to wait for it to show up,
we might press the button again, to try to get it to go through.
Is found, there we go.
So we got our lock in rolling right now.
One thing to keep in mind, if you are using a Z-Wave plus
lock, it might ask you for a DSK code for security purposes.
This is actually just a standard Z-Wave lock, I believe.
So it doesn't have that feature.
So yes, you see the security level S0.
So it doesn't ask us for a DSK code,
but if you do have higher security, Z-Wave plus or Z-Wave
700 series lock, then it will have that feature.
And you might need to enter in the DSK code
to get that S2 security setup.
So that's something to to keep in mind,
the DSK code is usually found on a QR code
somewhere on the lock, or on the packaging.
But we can choose Done, and then you can see,
we have our enrolled devices and we have
device 240, which is the lock.
OK, so we're at the Z Wave devices menu here and you see,
we have our lock device 240, and it is locked right now.
So let's try unlocking it.
We have the lock and we'll try pressing the button
on the panel to open it.
[WHIRRING SOUND]
[BEEPING]
And you see that the lock did unlock.
We do get a jammed signal on the panel,
but it did successfully unlock.
So it is enrolled with the panel.
We will also be able to include it
with smart scenes on Total Connect 2.0,
if we want to have it activate automatically.
So that's a cool feature as well.
As long as your panel is monitored with Total Connect
2.0 automation services, it will get pushed over
and you can control it from that platform the mobile app
and the web browser.
So that's pretty cool as well.
So I do want to show you one last feature,
we're going to go to the home screen
here by pressing the shield with the cross running through it
in the bottom right corner.
And now, I'm going to show you how you can set up a user
code functionality on the lock, so that way
if we want to unlock the lock using code push down
from the panel we can do that, and also
we can have the system automatically disarm,
when we enter such a code.
So let's go ahead and lock our lock.
And our lock is locked now.
And let's go ahead and set up this feature.
So we're going to press the three horizontal bars
button at the bottom.
We're going to go down to Settings,
and we're going to go to User Management.
And then we have to use a code to get in, we'll use our master
code 1, 2, 3, 4.
And then let's set up our master code with this feature.
So we're going to scroll down to Z Wave lock control
and it looks like it's already set up here.
Let's turn it to none and we're going to save it.
We're going to redo that again, we're going to set it
so it does get pushed down.
1, 2, 3, 4.
And we'll go back in and we're going
to apply the feature this time, so we know it gets pushed down.
Sync user code to lock and disarm.
So that way the code will get pushed down to the panel
and we'll be able to automatically disarm
the system when we enter the code into the lock.
So sync code to lock and disarm, and we'll be safe.
And we have to override or master code to confirm.
1, 2, 3, 4.
And then we're going to press the shield icon
in the bottom right corner.
So now I'm going to arm the system
and we'll test the feature out.
So we'll arm, and we'll just do Arm Home.
And we'll wait for that to arm.
And then when it does, I'm going to try
entering a code into the lock and we will see if it unlocks
and if the panel disarms.
So let's give that a try, once this countdown finishes up.
Armed in stay.
OK, so our system is disarmed now, I'm sorry, it's armed now.
It's armed home.
So let's press-- let's activate the lock.
And this has a security function, we have to do,
4, 6, those will always be two randomly generated numbers
just so you can't track the fingerprints on the screen.
That's actually a feature of this lock.
But it looks like I didn't do it quick enough, we'll try again.
2, 8.
And now, let's try 1, 2, 3, 4.
And you see that--
[WHIRRING SOUND]
[BEEPING]
The lock automatically unlocked, and let's see if we
get our thing at the panel.
Look at that, disarmed without us having to do anything.
It automatically disarmed because we set up that future.
So that's just a cool little thing
you can do with locks, Z-Wave locks that
are set up with the PROA7PLUS or other Pro Series alarm panel.
So that is how you add a Z Wave lock to your Honeywell Home
PROA7PLUS security system.
Have any question about Z Wave locks, Pro Series panels,
or alarm monitoring services in general,
send an email to support@alarmgrid.com.
If you found this video helpful, make
sure to give it a thumbs up below to like the video
and remember to subscribe to our channel
for updates on future videos.
We hope you enjoyed the video.
Thank you.