(soft music)
- [Man] We leave in two weeks.
Your truck's not done.
- Right.
- [Man] Why?
- 'Cause the damn Rona
(upbeat music)
- [Man] I mean, that's just pretty (beep) tall.
Oh my God!
You think it needs to settle out a little bit.
- This is a lot bigger than I was expecting,
I'm not gonna lie.
I thought it was going to look like
some tiny little (beep) truck.
It was only a six inch lift.
This doesn't sit like some tiny little truck.
We might have to take the leveling kit out.
- [Man] This is impressive.
- This is very impressive.
- [Man] Oh my God.
(engine roaring)
- Yeah, so we got the tail lights installed a while ago,
and I finally remembered to grab my keys,
so we can finally light 'em up.
- [Man] Those are really bright.
- [Banker] I told you they're bright.
- [Man] That's crazy, like.
- [Banker] Yeah.
- [Man 1] They're like, when it's not on pattern,
it's like, it's like battleship.
- [Banker] Yeah. They're neat.
- [Man] Those are sick.
- They're super neat.
Good job Recon.
- [Man] customoffsets.com
- customoffsets.com
Get yourself some Recons.
Also while you were gone, I put in an eight piece
black light,
or black label,
a white rock light kit.
It's pretty neat.
(soft music)
- [Man] It looks so good on the suspension.
- Right and I don't know...
Leave them off Nate.
I don't know how well you're gonna be able to see this.
- [Man] That's crazy.
- [Banker] Hopefully that picks up on camera.
- [Man] Yeah, I can't see where you're at,
but I can see a little bit of yellow.
- [Banker] It looks so cool in person,
- [Man] Which you can see at LTN.
(soft music)
(upbeat music)
- Alrighty guys, so, there you guys have it.
That is Banker's 2020 Chevy Silverado.
Now, before you guys go anywhere,
we are gonna do a full walk around,
just like our spotlights to wrap up this build series.
We just want to say thank you guys for sticking around
for the build series.
Hope you guys enjoyed it thus far.
Check this thing out.
So as I said, this is Banker's 2020 Chevy Silverado.
He did get it done in time.
We did make it to LTN,
and it was a freaking blast man,
so we had a great time down there
and everyone loved the truck, loved seeing the truck.
So, all righty guys, so this is the six inch super lift.
And then he actually has the Cognito Aftermarket
Upper Control Arms.
So as you guys can see, they are fully custom powder coated,
and this color really pops with this gray factory paint job
on this 2020 Silverado.
So if you come in close,
you can also see he's got his lower control arms done.
He's got the King rezzies up front with the King coil overs,
which was a super, super nice touch.
And then I really do love how Banker ended up
getting the coil spring around the coil over
a powder coil as well to match up.
I feel like that was a super fantastic touch
and really made everything pop.
So, along with the six inch kit upfront,
he also has a two inch rough country leveling kit.
So he has it bumped up to eight.
Now he was planning on the skipping around eight inch,
ended up being more of a six inch.
So he just used that rough country two inch,
brought the front up to eight inches in the front,
but don't worry, there's more in the rear as well,
we'll talk about that in a little bit.
Now moving into the wheels and tires,
we got the 24x14 ARKON Roosevelts
in a -81 offset wrapped in 37x13.5 R24 Gladiator X-comps.
Now the Gladiator X-comp, as you can tell,
it's extremely aggressive.
Super knobby and a really aggressive tire,
so super happy that he went with the X-comp
just because I feel like it really tied
this whole build together.
All righty, so moving back, I would say he's got tint
in the front, thanks to our tint guys
here at Fox Valley Tint.
They were able to get some tint
on the front windows to match.
Also, he's got his AVS visors on the windows as well.
Super nice touch.
You see his Instagram.
If you guys are interested in following him
and following his build.
Now in the rear, there is a two inch ReadyLift Add-A-Leaf,
so as I said, eight inches in the front,
we also have eight inches now in the rear to make this truck
sit at an even eight inches all the way around.
Also another touch in the rear,
he's got these enormous King shocks
along with the remote reservoirs, which is super dope,
and he got his brackets powder coated,
and every other leaf has also powder coated
here in the rear,
so really, really good attention to detail by Banker,
and it really flowed nicely.
Moving along to the back, he's got a Tuxedo PROX15
tunnel cover.
Now PROX15 is what difference the tunnel cover,
that is going to be the matte black one,
not the gloss black, which I really love.
And then also the Recon taillights.
Now this is going to be a black housing
along with a smoke lens,
so a lot better than those super bright red, gaudy
tail lights that come on every vehicle stock.
That was a really nice touch to really bring this gray black
and a high vis yellow scheme together.
All right guys, so now the only thing that is remaining
is the front bumper.
This is gonna be A.D.D. Stealth Fighter Bumper.
There was some trimming needed
on these side panels of the stock truck.
Banker was extremely scared to be cutting up
his brand new truck with a thousand miles on it,
but he did a fantastic job.
The fitment is really nice,
and it really pulled the front end together.
I believe he does plan to paint a match
with his factory color, which I think will
actually be really, really nice as well.
So that's what we got for you guys.
That is Banker's 2020 Chevy Silverado.
Once again, thank you guys for sticking with us
throughout this three part build series.
Hope you guys enjoyed this video and the build series.
If you did, make sure to hit the like button,
and if you guys need wheels, tires,
or suspension for your truck customoffsets.com.
We'll see you in the next one.