TO MATCH THE SHOWER SURROUND.
I'VE GOT A LOT OF WORK TO DO, SO
LET'S GET STARTED!
FIRST, I'M GOING TO PLACE THE
BRIDGE WOOD CUSTOM CABINET IN
PLACE.
I'VE ALREADY PRE-DRILLED THE
HOLES IN THE BACK OF THE CABINET
FOR THE WATER LINES AND THE
DRAIN.
YOU'LL WANT TO MAKE SURE THE
CABINET IS LEVEL.
IF IT'S NOT LEVEL, YOU'LL NEED
TO USE WOOD SHIMS UNDER THE
CABINET UNTIL IT IS.
I WAS VERY LUCKY THIS TIME.
THIS IS THE FIRST TIME I'VE EVER
INSTALLED A CABINET, WHERE IT
WAS COMPLETELY LEVEL FROM THE
START.
NOW, I'LL SECURE THE CABINET TO
THE WALL USING WOOD SCREWS,
MAKING SURE THE SCREWS ARE
HITTING STUDS IN THE WALL.
THIS WILL GUARANTEE THE CABINET
IS PROPERLY SECURED.
NEXT, IT'S TIME TO PUT A BEAD OF
SILICONE ON THE TOP OF THE
VANITY.
[♪♪]
THEN, SET THE COUNTERTOP IN
PLACE.
I
I'VE ENLISTED THE HELP OF A
FRIEND TO DROP THE COUNTERTOP.
I'LL MAKE SURE IT'S SECURED TO
THE SILICONE.
NOW, I'LL INSTALL THE
FLOW-CONTROL BRUSHED NICKEL
FAUCET.
I'LL APPLY A BEAD OF SILICONE TO
THE FLANGE.
AND SET IT IN THE SINK DRAIN
HOLE.
THEN, CONNECT THE DRAIN PIPES
FROM THE TAIL PIECE TO THE TRAP.
COLD WATER SUPPLY LINES.
♪
NOW, IT'S TIME TO TEST THE
PIPES FOR LEAKS.