Hello friend
Welcome to my video
In this video I show you how to configure the fortigate firewall Basics using the command line
First is the configuration for the internal interface
Set the IP address and netmask of the Lan interface
Set role is lan
Configure which protocols you want to access through the network interface
Next is the configuration for the WAN interface
In this video I do pppoe Dialing for WAN interface
Depending on your network you can configure Dynamic IP or static IP
Set role is wan
Step 3 configure DHCP server
As we can see, a dhcp server already exists, so we need to create another dhcp server,
with the sequence number 2.
Next we need to configure the parameters: gateway, address range, netmark
After creating a new dhcp server,
you assign it to the internal interface
Step 4 configure static route
You execute the commands as above
Set the interface to WAN
Set the gateway address to Dynamic
Step 5, Creating a policy to allow traffic from the internal network to the Internet
Give the policy a Name that indicates that the policy will be for traffic to the Internet
Set the Incoming Interface to the lan interface and the Outgoing Interface to the Internet-facing interface.
Set Source, Destination Address, Schedule, and Services is all
Make sure the action is set to accept
Turn on NAT
You can now browse the Internet using any computer that connects to the FortiGate's internal interface
As always if you found this post useful
And subscribe to my YouTube channel
Help me 500 thousand subscribers