it's here it's here it's here let's get
coupler and put it together give it a try put a little drop put a couple drops
of oil in it and crank it up. that is good sound a little piece of
equipment there I know you probably can't tell by sound but it sounds better
than the one I just got rid of nice little nicely in it this is that Makita
I've been working on I finally got around to getting all my parts I like
one part and I'm just gonna have to go to a small engine shop to get it it's a
c-clip but I got everything else had this off I took the magneto off it took
the coil off and this thing was just covered absolutely covered and the oil
from this and then an attract saw dust and dirt and all that I mean it was
packed in there so uh I've got this special cleaning fluid here that I've
been using clean everything up and looks pretty good I've got the new choke on
I've got I'm fixin to put this new switch on here the new switch actually
it goes this way no because this well I'm gonna put the
switch on and put everything back on top
new clutch new sprocket washers that hold it on and I need a c-clip that's
all I need is a c-clip and I'm gonna put this thing together and I'm gonna go
ahead and sell it I'm not gonna keep it like I thought I spent a lot of money on
an office chair and new wrenches and what else oh I thought it had to buy a
battery for that the battery that came with it it was it had been dead for
about a year and I actually managed to get it to charge up to 100% and it held
the charge for a few days but the battery was went dead while my wife was
using it and when that happens the PTO quits working by the time the battery is
low enough for the PTO to quit working a lot more won't start doesn't have enough
juice in it to start the lawnmower so I bought a new battery and so I'm gonna
I'm gonna sell this to try to recoup some of the money I've spent the last
few days but I'm almost there this thing's been sitting on my bench for
quite a while got tired of looking at it don't have everything I need any one
more part and we'll have this together let me tell you something else I had a
scare you know I only have four batteries that go to my Makita tools
these two batteries are fakers they're for my wife there are five amp power
batteries so I use them because I don't want to wear him out on on her about
that there was a gift that chainsaw that there's a green one here oh so yeah this
Makita chainsaw she wanted something she could use without canceling it anyway I
went to charge my batteries and it said uh the battery was bad so I've not used
these you know I don't usually these that often
so I tried a second battery and it said the second battery was bad so I'm
thinking now there's no way I've got two bad batteries out of the four tried the
third battery journal if it said battery's bad so this came with my
wife's chainsaw so I got this out and put the bad the ones that were
supposedly bad in this and charged them right out no problem so that's my
warning if you have a Makita battery and your battery charger is telling you the
battery is bad it might not be it might be the charger so I've actually ordered
another charger I'm gonna leave this here but I'm gonna have the other
charger just so if I have to take my tool to somewhere with me I'll have a
charger to charge these up anyway just a heads up if your charger is saying your
battery's bad double-check make sure your charger is not bad okay got more
little pieces to put on and then all I got to do is go get a c-clip can I put
the bar on the chain on and then crack this up and get it adjusted and get it
on Craigslist I'm gonna ask 300 for it with all the parts plus the cost of
buying it I'm into at about a hundred and fifty bucks so selling it for 300
somebody would get a nearly new chain saw it's an excellent shape anyway well
when I get this I won't put this video up until I get this all together and
it's running yep don't need now a little c-clip oh yeah I got a 22 - nuts - okay
that's it for today I smell like gas I would go in and take a shower
oh boy that was a long time coming and I said I think I said yesterday that that
I've got about 150 into it and I forgot to add the chain that's a new chain so
new bar new chain new plug new air filter new clutch new sprocket new gas
gas and oil caps new on-off switch so probably hundred and seventy no more
than that and I still got to adjust the idle down and I have to adjust the
carburetor a little bit but I was just anxious to get it cranked up so that's
next I'm going to do a little fine-tuning on it and I may go cut
something tomorrow I got a pear tree that's how I'll show
you how it's got something growing up beside it that's not a pear tree and
it's and it's kind of drowning out the pear tree and I'm gonna cut it down so
the pear tree can get all the nutrients all right but I am going to upload this
just because I'm really happy I got this cranked and running after having it so
far apart and waiting so long for parts okay
this is the last thing I'm going to ask 300 for this and it's the last thing
I've got broken right now so after this it's probably back to making knives