- Hey, what's up guys! Welcome back
to the Chemical Guys Detail Garage.
Joey just finished with the Prius on the interior.
Now he handed her over back to me.
And now it's time for me to show you guys
how to properly use the full Hydro Line
on the exterior of this vehicle.
Let's get started.
All right, guys, before we get into
the fun part using the Hydro Line
on the exterior of this vehicle,
we're going to start off with the basic wash.
The basic wash is a crucial step
because this is going to knock
off any loose grabbing debris, as well
as going to remove any glazes, sealants, or waxes
that the paint might have.
So this is why I chose to go with Mr. Pink,
because Mr. Pink is a basic washing soap.
That's going to produce tons of suds
and then I will be mixing it with Clean Slate.
So Clean Slate is a stripping cleanser
that's going to remove any glazes, sealants, and waxes.
That is correct.
You can mix them so you cause a foam-like action to it.
So whenever you come with a Chenille Wash mitt,
it's going to be soft, plush and it won't scratch your ride.
I will also be pairing it up with a two bucket method.
The two bucket method is going to help me reduce
scratches and swirls.
One bucket is going to be my wash bucket
and the other one's going to be my soapy bucket.
So anyways, let me set it up!
Peter, roll the cinematics.
Alright guys, so now let's
move on to next step.
We moved on to the Clay Bar process.
We always recommend doing a Clay Bar process
on your surface of your vehicle
because we're going to be removing contamination or any
overspray that are sitting on the surface of your vehicle.
The Black Heavy Duty Clay Bar did an amazing job
at removing the contamination,
so now the paint is smooth as glass.
After that, we needed to polish it out.
We always recommend polishing out
before you apply a ceramic coating like HydroCharge
or HydroSlick because you need to keep this in mind.
Anything that is sitting on the surface of the vehicle
whether it's scratch and swirls, rock chips, imperfections,
you're going to seal them up and over time,
HydroCharge and HydroSlick are going to harden
on the surface of your paint,
and it's going to be a little bit more difficult
to remove down the line.
So always take the proper steps: Clay Bar, polish and
like this your ceramic last longer, but now enough talking.
Now it's time to talk about HydroCharge.
So HydroCharge.
It is ceramic spray coating.
So how do you use HydroCharge?
We recommend shaking up the bottle before using it.
You'll get the proper mixture.
Once you get the proper mixture
you'll grab a very soft microfiber applicator.
You'll spray a couple of sprays onto it
and then you'll work it in side-to-side.
You let it sit on the surface of vehicle
from anywhere from 30 seconds to a minute.
It all depends on the weather where you live.
For example, if you live
out somewhere where it's very hot, very high humidity
we only recommend letting it sit for 30 seconds.
If you live somewhere too much cooler and it's not as humid
we will recommend letting it sit for one minute.
It's like that.
You get a proper ceramic coating whenever you apply on
to the surface of your vehicle, but keep this in mind.
You can only apply it on painted surfaces.
Now, in the meantime, you let HydroCharge sit on
the surface of your vehicle and now you buffed it off,
we recommend moving on to your glass.
HydroView is going to eliminate any streaks
any imperfections
and your glass is going to look amazing anywhere, anytime.
So you might encounter a lot of rain.
You might encounter a lot of industrial fallout
but HydroView is going to reduce all of that.
It's also going to be reducing fogging up in the morning.
So if you leave your car outside
HydroView is going to be a perfect partner for you.
It's going to reduce fog,
it's going to activate water beading
and anything that's on your glasses.
is simply going to be washed off
as a simple spray down.
And now you're good to go.
Moving onto the next product
which is going to be HydroSlick.
What is HydroSlick?
HydroSlick, it is Ceramic Infused Hyperwax.
What is the Hyperwax?
It's just like using a wax.
You simply apply it onto microfiber applicator,
rub it side to side
but, keep this in mind,
HydroSlick can be applied on multiple
different surfaces, such as your glass, your wheels
your headlights, your taillights, your chrome
as well as your paint.
That's right. We recommend applying.
HydroSlick over HydroCharge
to achieve the maximum protection
and you stay protected all year round
using the Hydro line
but there also is going to be a time-span.
After you finish applying HydroCharge
allow it to bond to the surface for three hours.
Then that's when you move onto HydroSlick.
Same exact concept.
If you live in a high humidity area
let it sit for 30 seconds.
If you do live in a colder area, we recommend that
letting it sit for one minute.
After 30 seconds or a minute has passed,
you buff it right off
and now your paint is going to be slick as glass.
We're going to be moving on to our next product
which is going to be a very high needed product
to maintain your ceramic coatings on your glass
on your paint, on your wheels or anything
that's ceramic coating on your ride
and that's going to be using HydroSpeed.
HydroSpeed is ceramic-infused quick detail spray.
So say for example, I washed my car today by tomorrow
it's already dusty, and now it's time to rewash it
but it only has a very light thin grime or debris.
That's when I'll pop out HydroSpeed
I'll simply spray on to microfiber towel
or direct it onto the surface of vehicle
buff it side to side and, like that,
and like that I am rejuvenating the hydrophobic properties
that the Hydro Ceramic Line produces.
HydroSpeed can be used on multiple different surfaces,
such as your glass, your headlights, your taillights
your Chrome, your painted plastics,
as well as your paint.
So like this, you stay protected
and you maintain your ceramic coatings.
They last much longer
and they stay rejuvenated using HydroSpeed.
Simply shake it up.
Spray onto microfiber towel, directly onto your vehicle,
buff off and unveil the amazing shine that's going to
rejuvenate by using HydroSpeed.
And finally, to maintain your ceramic coating,
when it comes to a wash, we recommend using HydroSuds.
HydroSuds is a ceramic infused carwash soap
that is going to produce amazing suds.
What also is important is the properties
and the ceramic that's going to bring to your wash.
Apply one ounce of it into your foam blaster, foam cannon
or your traditional two bucket method.
And like this, you stay protected even while you wash.
So like this, using the Hydro Line
you get to stay protected all year round
from interior to exterior vehicle.
So guys, if you guys liked the video today,
don't forget to give it a huge thumbs up.
If you would like to pick up any of these products today
you could hop on our website right now.
ChemicalGuys.com. Join the Hydro Line family.
You will love it. You will rave about it.
I will see you guys next time,
right here at the Chemical Guys Detail Garage.