well here we go again about a year and a half ago I put all this now I'm gonna pull it all out see
the problem has been all of the big tools that I now have such as a drops or a table sort of
vacuum those things I bought after I did this fit out and unfortunately none of them fit underneath
the platform so I have to raise the platform and reposition drawers and things like that in order
to fit those things see these drawers here really good they hold so much stuff but all my boxes are
this size space so I'm gonna make the drawers that what and by making the drawers that wide
I can free up all the space in the middle other things the other idea I had to utilize the space
on this old setup is this hatch and I've done them on both sides and it it kind of helps you
know you get a bit of space around the wheel arch which helps you know space that isn't wasted but
the downside is as soon as the given sheets of plywood like this that is trapped so any tool or
bleed or whatever you have in there you can't get to it rather than doing it this way we'll
figure something else out the sliding doors see these drawers I thought were great I made
this one come out further than the bottom one because the over hand stopped me from getting
into the draw so a bit of thought went into it but I have wasted space over here screws tools a
bunch of stuff down here and inside the drawers just sort of like odds and ends you know this
is all space it can be better used by the bigger items such as a drops or which brings me to this
when you open these slider doors you end up with a channel here when I'm driving in the
doors close all the stuff falls down here there's things on top of the platform so
I want to bring this right out and do that at the bottom for the shelves and that way
I'm getting that much more shelf space they're much more platform things aren't falling down
it looks good I have twin sliders so I can get to both sides with big items like drop swords
and tables is I'm gonna utilize that and now the drawers are out I can start taking all this apart
so you can get a better idea of how I built this we've got the tracks look copper came
off no glues not so good tracks sitting here and the levels sitting there all that slides
through underneath the bed over there I put these plastic dividers here just to stop it
going side to side probably not necessary it doesn't really go side to side with the
carpeting there so now we just have to pull all of this out and start again wish me luck